| H095204 |
Used 136" wide (3450
mm), 130" trim (3300 mm) Bruderhaus (12) roll super calender stack,
300 n/mm linear pressure, 700 m/min. (2297 fpm) speed. Drive and spare parts included. |
| H096800 |
One (1) used 6-roll
Holyoke supercalender. 3-Steel
rolls and 3- cotton rolls. (No
drive). |
| A097452 |
Used 1710 mm (67") trim Bruderhaus SK 15, 14 roll supercalender. 1800 mm ((71") maximum unwind, 1500 mm ((59") max at reel. Design pressure 500 kgs/cm and working pressure 250. Reconditioned by Gorostidi in 1989. 198 kW with drives and controls.
 |
| H092742 |
Used 1,900 mm wide 12
roll Kleinewefers supercalander with a maximum speed of 250 m/min.
Includes winding and unwinding core shafts; detection at a break;
(2) super calandering diameter 250 heatwater 65°C.; and (2) cranes. |
| H095510 |
One (1) Used
Supercalender 88" (2.25m) Jospeh Eck & Sohne 12 Roll. Year: 1952,
Weight: 35.500Kg, Power: 140 CV (HP), Speed: 200mpm. Total Pressure:
35,000 Kg |
| H096697 |
Used 2350 mm face
(92.5") 10 roll Allimand calender stack, 250 kg/cm2. (4) rolls are
iron, (5) are wool and (1) Kuster. |
| A097694 |
Used Haubold 13 roll
supper calender, 2400 mm (94.4" maximum trim, 2.7M ( 106.3") roll width. 150
to 450 gsm; 200 meters per minute maximum speed; 0-50 bar maximum linear
pressre (3000 N/m). 6 paper rolls and 6 steel rolls. One heated roll.
 |
| H094856 |
One (1) Used 2.45m
(96") 12 Roll Kleinerwefers Supercalender mdl8/12 800 m.p.m. Grammage
range 60-300. |
| A097423 |
Used 2550 mm (100"_ trim Burgo Marzabotto 14 roll super calender, 5-700 mpm (1640 - 2300 fpm) speed. 300 kP/cm at bottom roll. Rolls: bottom swimming roll with cast shell 500 mm diameter; 2nd roll of soft material 450 mm; 3rd roll is cast iron 280 mm; 4th and 5th are soft material 450 mm; 6th of cast iron 280 mm; 7, 9, 11 and 13th of soft material 450 mm; 8, 10 and 12th of cast iron 280 mm; and top roll is cast iron 520 mm. Main DC motor is 500 kW; reeler DC motor is 184 kW; and unwind stand DC motor 25 kW. Ward Leonard drive system. Unwind stand suitable for a 1400 mm dia parent roll. Reeler for a 1400 mm parent roll with loading device. Air loaded arm press. Mipco bottom roll. Previously used with Jagenberg coater.
 |
| A097424 |
Used 2550 mm (100") trim 12 roll Burgo Marzabotto super calender, 400 mpm (1300 fpm) 250 kP/cm at bottom roll. Rolls: bottom Kuster roll 500 mm; 2nd roll is soft material 450 mm; 3rd is cast iron 320mm; 4 and 5 are soft 450 mm; 6 and 8 of cast iron 250 mm; 7, 9 and 11 are soft 450 mm; 10 is cast iron 270 mm; and top roll of plain cast iron 480 crown roll. Unwind and reeler suitable for a 1400 mm parent roll. Motors are DC. Used on printing papers.
 |
| H096636 |
Used 2540 mm (100")
face 12 roll ECK & Sohme open frame super calender stack last used on
wood free coated paper 50 - 140 gsm, 500 meters per minute, 300 kg/cm
linear pressure and d.c. drive. Roll
specs available upon request.
Unwind & wind width 2540 mm.
Unwind and wind diameter 1550 mm maximum. |
| A097380 |
Used 2600 mm (102") trim Eck 10 roll super calender. Maximum speed 500 m/min (1640 feet/min). Grammage 70 - 300 gsm. Bottom roll 600 mm diameter; top roll 500 mm diameter each; 4 pcs paper roll 400 mm; and 10 pcs paper rolls 400 mm diameter. The drive has been updated with new motors, windings, gear boxes, hydraulics and lube system. The interior elevator was installed at the present site. Photos and drawings available upon request.
 |
| H094620 |
Used 2600 mm trim Eck
& Sohne 10 roll super calender. Working speed is 300 MPM, maximum
speed is 600 MPM. 220 kg/cm line pressure. Includes hydraulic unit, crane
for roll changing, reel shell unwind and rewind and controls. |
| A097036 |
Used110” trim 16 roll
Hunt & Moscrop (rebuilt by B.F. Perkins) open type supercalender with
2 drum rewinder, web speed of 1,500 maximum. Maximum roll diameter 40”
on shafted unwind and rewind using 5” cores. New SAF drive. Has nine chilled rolls and 7 filled rolls, plus 9 spare
filled rolls and 2 spare chilled rolls. Calender used 14 years. |
| A097958 |
Used 7-roll Kleinewefers
supercalender, 2870mm (113") i face width, installed in 1989. Frame designed
for possible future 8-roll configuration Design speed of 1000 m/min (3281
fpm) Loading range of 92 - 150 kN/m (525 - 857pli) in bottom nip via bottom
hyd loading cylinders. Top and bottom 450m (17.7") dia. Hunt & Moscrop
swimming rolls w/chilled cast iron shells + spares (3) Intermediate 540mm
(21.25") dia. soft composite-covered rolls + spares (2) Intermediate 380mm
(15") dia. "Flexitherm" thermo rolls + spares a lot of auxiliary fly,
spreader, and tension-measuring. rolls + spares Bastian 3-position
turret-type unwind/windup on fiber cores Max unwind/windup parent roll dia
of 1500mm (59"). Sensomat rider roll system. Pneumatic intermediate roll nip
relieving. Spare roll stand w/roll change cranes & beams Inside & outside
moveable threading/service platform.s Web chopper |
| H096189 |
One (1) used Hunt &
Moscrop 113" 16-roll supercalendar.
1500 FPM. Maximum roll diameter unwind 40".
Rewind diameter 40". Drive
type: D.C. M.G. set Reliance, 400 HP. Constant tension. Tidland
air shafts 5". Shafted
unwind. Break type:
Regenerative and feed back. |
| H096668 |
Used Bruderhaus 124"
paper roll width, 12 roll super calender.
Max. speed 400 mpm reel diameter 71" (1800 mm).
Lineal pressure is 300 kg/cm.
Maximum rewind and unwind is 1800 mm. |
| H095334 |
Used Kleinwefers 12-roll
super calender, type 120/12, designed for super calendering of 100-240 gsm
woodfree coated fine papers. Face
width of chilled iron rolls is 3.32 meter, and face width of filled rolls
is 3.3 meter. Sheet width
3040 mm. Operation speed 800
m/min. Feeding speed 8-15
m/min. Linear mix pressure at
bottom is 350 dan/cm max. Power
required for main calender drive is 640 kW.
Unwind dia. 2200 mm, rewind dia. 2200 mm.
Spool dia. est. 360 mm. |
| H095803 |
Used Joseph ECK &
Sohne, 3.25 meter (128") 10 roll super calender stack.
450 meter speed. Open frame design. 78"
diameter unwind and 60" diameter rewind.
5 chilled iron rolls, 5 woollen rolls.
Top roll 23 5/8" dia. Bottom
roll 27 5/8" diameter. Spare
intermediate rolls. Includes
motor and controls. 400 hp
motor. |
| A097421 |
Used 3300 mm (130") trim Klein Weffers Type K 120/10/12 super calender with an operating speed on 750 mpm (2460 fpm). Rolls: 5 rolls of paper material 560 mm diameter; 2 rolls 520 mm diameter; 3 rolls of cast material 360 mm diameter; 1 Kuster roll 450 mm diameter; heating and cooling system with cylinders in cast iron. Sensomat rewind system. 2 lifts for servicing. Unwind stand for reels with a max. dia of 2200 mm (86.6"); 1 lower reel for winding of two paper layers; 1 rewind reel for 22500 mm with shaft dia of 800 mm. Includes electric crive with cooling fan for motors, controls, and spares. Still in operation. Photos and sketch available. |
| A097422 |
Used 3390 mm (133") trim 12 roll ECK & Sone super calender with a speed of 800 mpm (2625 fpm). Rolls: top roll is cast iron 800 mm diameter; 2 linen paper rolls 600 mm; 4 linen paper roll 450 mm; 4 cast iron rolls 350 mm; one driven roll; and 1 Kuster roll 450 mm. Lifting table for service 500 x 4500 mm and one overhead crane. Unwind stand for reels with a max of 2200 mm 86.6") diameter. Lower reel for winding two paper layers and 1 rewind reel for 2250 mm dia and 800 mm shaft. Includes motors, hydraulic system, controls, etc. Sketch and photos. |
| H093209 |
Used Bruderhaus 12 roll
super calender. Face width
3400 mm (approx. 132.6"). Working
width 3230 mm (approx. 126"). Operating
speed 600 meters/minute. Lineal
pressure 30 kg/cm. Unwind/rewind
diameter is 1500 mm. |
| H096472 |
Used Bruderhaus 10 stack
super calender 3.4 m (134") working width; 1400 mm (55") unwind
dia.; 1500 mm (59") re-wind dia.; 680 m (2231') per minute maximum
speed; 300 kg/cm maximum pressure. Bottom
roll 750 mm (29.5"); top roll 650 mm (25.6") dia.; Intermediate
rolls 400 mm (15.75") dia. 400
kW drive. Range 17-110 g/mz.
Has (8) spare paper rolls and (1) spare intermediate roll. |
| H092486 |
Used 3450 mm wide, 12
roll Bruderhaus-Gorostidi super calender stack, 800 meters/minute working
speed, 300 kilogram forc/cm linear pressure. Drive with automatic draw
control by motor generator brake, and loading cell control with asea unit.
Hydraulic automatic press control equipment. |
| H093712 |
Used Bruderhaus model
14/3450 super calender. 14
rolls. 3450 mm face (approx.
136"). 700 mm dia bottom
Kusters s-roll, 380 mm dia drive roll, 4 intermediate rolls, 320-330 mm
dia, 700 mm dia top roll, 7 paper rolls 520 mm dia (wool/cotton).
Lineal pressure 260 kp/cm. Machine
speed m/min. Hydraulic
equipment for the s-roll. 500
mm max unwind. Pope reeler, 2
steam pipes for moisturing, control desk drive. |
| H094962 |
Used Voith-Kusters
12-roll super calender. Working
width 3500 mm. Shaft type unwind. Auto
tension control. Pneumatic
brake. Center rewind. Maximum speed approximately 600 m/min. (dependent upon
stock). Kusters s-roll
480 mm dia. waterheated roll 610 mm dia. |
| A097420 |
Used 12 roll ECK & Sons super calender 3750 mm (148") working width, 600 mpm (1970 fpm) speed. Linear pressure is 180 -- 200 kN/m (1028 - 1143 pli). Bottom roll crown controlled Kusters. Unwind/rewind for 2035 mm (80") diameter paper rolls. Paper loading lift for paper loading front and back. Drives. Dismantled. Sketch available. |
| C097439 |
Used 150” trim Beloit, 9 roll supercalender. Design speed is 2500 FPM and rolls are balanced for 3000 FPM. Normal operating speed was 2200-2500 FPM. Maximum design load is 2000PLI. Two swim rolls, 4 filled and 3 chilled iron rolls. Grades normally run include 34# - 60 # Offset, 34# - 60# Roto, and 33#-35# SCC and SCB. Stack is driven by one intermediate roll through a Falk 152Y1S double input gearbox with two, 350 HP DC motors. Doctor oscillators were replaced in 1998 with Thermo Web units. Main drive gearboxes were replaced in approximately 1996. Hydraulic system for #2 Supercalender swim rolls was replaced in 2000. Two calenders available. |
| A097426 |
Used 150" trim "A" frame design Aooleton 11 roll super calender. Cotton filled rolls up to 2000 fpm and typical loading is 1100 to 1500 pli. Rolls are 5 cotton, 3 steel intermediate and crowned king and queen rolls. G.E. drives and DC 2000 digital drives. 60 HP unwind, 400 HP main and 75 HP wind up. Previously ran light weight coated 34 - 70 pound. |
| A097053 |
Used 152” trim 7 roll
super calender manufactured by Holyoke. 1000 FPM on 40-70#
coated magazine stock. Top and bottom rolls are fixed crown.
Includes a Moore & White winder with Tidland slitter section. |
| A097052 |
Used 152” trim 9 roll
super calender manufactured by Textile Finishing Co. 1000 FPM on 40-70#
coated magazine stock. Top and bottom rolls are fixed crown.
Includes a Moore & White winder with Tidland slitter section. |
| H093973 |
Used 154" Beloit,
Messinger 9 roll super calender, 145" web width, 1500 feet per
minute, 1600 pli, 60" unwind roll diameter, 65" windup roll
diameter with 34" diameter king roll and 32" diameter queen
roll. (7) intermediate rolls including 3 chilled iron and 4 cotton paper
filled. Spares included |
| H093276 |
Used 159" face
Appleton 9 roll super calender, with 26" dia. X 160" variable
crown bottom king roll, 30" dia. X 160" face chilled iron top
roll, three (3) 15" x 160" chilled iron intermediate rolls, four
(4) 21" x 159" cotton filled intermediate rolls, 10 roll a frame
w/spacer for 9 roll operation, max. design bottom nip 2000 pli, max.
design speed 2650 fpm with unwind and rewind for 96" dia. rolls, left
hand unit, previous use on coated publication paper.
With hydraulics and controls. |
| H095191 |
Used 4.5 meter
Kleinwefers type K 150/12, 12
roll super calender. 700 meters per minute maximum speed. Paper range
40-100 gsm w/p papers, 55-70 gsm lwc and 100-140 gsm art papers. 320 dan/cm
line pressure. Top and bottom rolls are kusters S-roll, 660 mm diameter.
560 mm dia. Paper rolls. |
| H095471 |
Used 233" face 10
roll super calender stack manufactured by Jos ECK & share (now
Kleinewefer). Main rolls as
follows: (1) bottom roll 36.2"
dia. X 233" face, steel; (3) intermediate rolls 17.7" dia. X
233" face, steel; (5) intermediate rolls 26.5" dia. X 231"
face, paper; (1) top roll
31.5" dia. X 233" face, steel.
All rolls fitted with SKF bearings & housings.
Spare rolls include (10) paper rolls, (2) intermediate steel rolls,
(2) steel fly rolls, & (2) rubber mount hole rolls.
All with SKF bearings & housings.
Includes overhead cranes
to service calender rolls & jumbo roll handling crane with
platforms & support rolling steel beams. Length of rewind drive
approx. 126". With
drives. |
| H093780 |
Used Beloit 280" 10
roll super calender. 2,000
fpm. Used on light weight
grades 24 - 40 lb. |
| H094592 |
Used Bruderhaus 12 roll,
7,600 mm face super calender stack with Kuesters bottom roll and chilled
iron top roll. Speed, 800
m/min. |
