|
Digesters
While we
attempt to maintain accuracy, we strongly suggest you contact Acme to determine
if the item(s) you see are still available for sale. We will try to update
monthly, but if you don't see what you are looking for, please contact us. We
may already have what you need, or we can do a global search and find it for
you.
| H094115 |
One (1) used Steel and
Alloy Tank (Pandia type) horizontal screw continuous digester.
54" Diameter X 38' long.
Stainless steel screw - stainless steel clad tube.
Shell rated 170 PSI @ 400 degrees F. with inlet and outlet valves.
Rated 70 T/D on bagasse. |
| A098154 |
Kaymr continuous
digester, size 21895 x 2540, volume 286.132 mtrs/3, max throughput of 19T of
air dry chips in 75% yield. Blow flow 2200 lpm. Working pressure 8.5 to 9
bar, steam phase temp 175 deg C., liquor phase temp 166 deg C. active
chemicals sodium sulphite caustic, Na2SO3, average yield is 76%, residual
sulphite in the black liquor is 9 to 11%, differential pressure is 40%, back
water to bottom 400 lpm., temp 40deg C., 70% above scrapper and 30% below,
digester computer is Foxboro I/A, bottom scrapper with Hagglunds hydraulic
drive MA141, speed 8 to 10 rpm, load 50 bar, max load to stall 210 bar.,
blow tank with agitator working at atmospheric pressure, Sprout Waldron
rotor drainer 4ft x 12 ft. New base fitted 2000 with Duplex coating and
complete base spare. Two spare HP pumps and one spare LP pump all overhauled
ready for use. |
| A097109 |
Used model 459 Bauer M &
D digester, 84” diameter x 92’-6” long to produce 278 ODTPD. Vessel code
stamped for 177 psig operating pressure @ 378 degrees F., with a design
pressure of 213.3 psig @ 400 degrees. ¾” thick head and shell, 20% 316L
stainless steel clad. Conveyor flights are ¼” plate. |
| A097792 |
Used Blaw Knox continuous
digesters, 11' diameter x 46'-8" high, 33,158 gallon volume, 100 psi
operating and 122 psi maximum allowable pressure at 332 degrees farenheight.
Decommissioned July, 2003. |
| A097109 |
Used model 459 Bauer M
& D digester, 84” diameter x 92’-6” long to produce 278 ODTPD.
Vessel code stamped for 177 psig operating pressure @ 378 degrees F., with
a design pressure of 213.3 psig @ 400 degrees. ¾” thick head and shell,
20% 316L stainless steel clad. Conveyor flights are ¼” plate. |
| H092600 |
Used C.E. Bauer 36"
dia. X 26' long digester, steam tube, T-316 stainless steel contacts.
Maximum allowable working pressure 70 psi @ 316 deg. F.
Vessel mfg. By Nooter in 1979, national board #94.
C.E. Bauer serial #38514. With
a rotary feed valve, and screw conveyor.
Rotary valve s/n 38010. |
| H094474 |
Used KAMYR digester
previously used for 550 ton/day of hard wood, 390 cu meters (1,377 cu.
Ft.), Top dia. 4200 mm (163"), bottom dia. 2600 mm (102"),
height 39.5 meter (129'8") constructed of pressure proof composite
steel. Design pressure 12.7
bar @ 175 deg. C. Includes many accessories. |
| A097866 |
Used Kamyr/Celdecor
continuous digester, 4200 mm (13.78") diameter x 24,500 mm (80.4 ) long. 189
BSMT/day (24 hours) Sulphate pulp. Digester yield is 47% BD on Reed and 42%
BD on Straw. Reported good condition and ready for production. |
| H096253 |
Used vertical digester
manufactured by Union T. 11'-2" diameter x 434'-3-1/2" high.
Shell is SA-265, 316L, 7/8" thick. Code stamped for 125 psi at 650
degrees F. |
| A097460 |
Used Voest-Bauer continuous M&D digester, 60" diameter x 12 meters (39.37 ') long with pre-steamer and spare parts. No feed valve nor discharge valve. Last used at approx 120 TPD, yield 80% (birch). |
| A097461 |
Used 12" feed valve and 8" discharge valve for M & D digester. |
|
