| A097455 |
Used 2,320 mm slice width, 2320 mm (91") trim Beloit (Enertec) Converflo headbox, new 1986. Design speed 400 m/min (1300 fpm) Total width (soleplate centerlines) 2550 mm (100"). Capacity 18,000 liters/min (4,756 gpm). |
| A097655 |
Used 2620 mm (103") slice
opening KMW headbox, 2 rectifier rolls, operating speed 100-450 mpm, 60 to
300 gsm for a capacity of 65 to 120 TPD production. Flow rate 3000 - 15,000
liters per minute
 |
| A097670 |
Used 3050 mm (120") wide
Voith Aircusion headbox last used on 75 - 280 gsm. 4240 lpm minimum and 8720
lpm maximum flow. 23 spindel positions. Has conical pipe flow distributor.
 |
| H094728 |
Used 127" (3.22M)
slice Valley air pad, pressurized headbox. Previously produced up to 150
tons per day recycled and fine paper. Recent rebuild included stainless
steel rectifier rolls, inlet manifold and tube bundle. All contact parts
316 s/s. Primary headbox. |
| H096365 |
(Available upon request.) |
| H095195 |
Used Valley 128"
(3.25M) wide open headbox, 304 stainless steel construction. |
| A097669 |
Used Wolf 3350 wide
(132") Aircusion headbox previously runing 75 - 280 gsm at 440 lpm minimal
and 14,085 lpm maximum flow rate. Has 24 spindel poitions and actuators.
Octopus flow distributor. 2 Holey rolls.
 |
| A098052 |
Used 135" pond, Beloit
Concept 3 headbox, rebuilt in 1994 by Beloit. Speed is 2500 fpm (763 mpm).
Right hand. Previously made fine and coated papers. |
| A097754 |
Used 153.5" (3.0 meter)
trim Ahlstrom Ahlflow-H hydraulic pressure headbox, 1.22 meters per minute
construction speed, 400 - 1,000 mpm operating speed, 56.963 - 69.641 lpm
flow. Operated .5 - .65% pulp consistency. Lip width 4250 mm. Produced 310
tpd at 70 gsm writing and printing papers 50 - 120 gsm (180 gsm max). 11
meter headbox and maniflow piping pressure drop.
 |
| H096663 |
One (1) Used 4250MM
(167") Ahlstrom Headbox. Year
of Manufacture: Design Speed: 1200 m/min.
Operating Speed: 400-1000 m/min. Slice Width: 4250 mm.
Weight Range: 50 -120 g/m2, max: 180 g/m2. Operating Time: 1 A.
Dismantled: 1988. |
| H092969 |
One (1) used Beloit Model
LFS-25625 pressure headbox. 167"
(4.25M) pondside, T-304SS construction.
(27) header tubes sized for 20,000 G.P.M. to headbox - 24"
diameter stream flow valve. Standard type slice lip with 2"
adjustment. Standard rotating
shower. Five (5) rectifier
rolls. Left hand. |
| H095699 |
Used 168 31/32"
total slice width, 168" (4.27M) pond width Valley Iron Works air
padded headbox. Cast iron with stainless steel lined. 22,500 GPM. Spare
slice and distribution roll. |
| H096171 |
Used 173" (4.39M)
pond, Black Clawson high energy bunch tube, pressurized headbox designed
to ensure optimum stock suspension, dispersion in the controlled flow from
the slice. Disigned for a mid-range low at the slice of 10,200 GPM at a
consistency of 1%. Furnish 65% minimum virgin fiber and 35% maximum
recycled fiber. Produced corrugating medium (9 pt.), 26 pounds per 1000
sq. ft. 70% retention, 180-222 CSF freeness with 160 deg F temperature.
Full specs and sketch available. New 1982. |
| H096292 |
Used headbox, 180"
(4.57M) pond width, by Douglas Bros., Pressure type, made of 316 s/s plate
reinforced with mild steel. Overall
dimensions 15' wide x 7-3/8" deep x 3'3/4" high.
Distributor roll 16" dia. X 180-3/4" long, type 316 ss,
50% open area, 1" dia. Perforations, journals 1-15/16" dia.
Breaker roll similar to distributor roll except has internal flow
Evener baffles on 4" centers, the full length of the roll. LOCATION:
CN |
| H094534 |
One (1) used Beloit
186" pond (4.72M) Converflow Concept I hydraulic T304 stainless steel
pressurized headbox. With
Measurex CD profiling system (thermal rod actuation), 32 zones with
control bay. Last running
2000 FPM of corrugating medium. |
| H095883 |
Used J.M. Voith type
w8500/10000 headbox. 4.98 mm
(194") slice width.
Right hand drive. Speed
480 m/min to 1200 m/min (1560-3900 fpm).
Previously used 45.80 gsm. |
| H096386 |
Used Dominion pressurized
headbox 5400mm (212") wide, hydraulically good for 760m/min. (2500
fpm) at 0.6% consistency. |
| H093404 |
Used Voith 5400 mm
(approx. 212") wide hydraulic headbox.
Stainless Steel. Model
W1000. Last used at 750 MPM
with a mix of mechanical pulp (78%) and Kraft.
Reportedly capable of 1000 MPM.
Last used as a secondary headbox on a newsprint machine (45 &
48.8 GSM). |
| H095096 |
Used Dominion Dynaflow
headbox, 257 3/8" (6.23M) face, maximum speed 3,500 fpm, c/w heating
system. |
| H096775 |
Used 258" (6.55M)
Pond side Beloit-Rauma Concept III secondary headbox. All stainless steel. Designed
for 2,000 FPM linerboard. Fully
hydraulic, no air cushion or rectifier rolls. |
| A097616 |
Used 6860 mm (270")
Escher Wyss 252-03 headbox, maximum speed 630 M/Min, minimum capacity is
15435 l/min, maximum capacity is 29500 l/min. 25-40 gsm, Production at 25
gsm is 147 MTPD maximum with stock consistency of 0.35%. Pressure loss max
is 10 m. New in mid '80"s.
 |
| H092591 |
Used 272" (6.91)
pond side Tampella headbox, side inlet, air padded rectifier roll, tapered
inlet header. (2) rectifier
rolls. Slice lip opening
range 0.08" - 2.5". Design
flow 4,000-10,000 gpm, design consistency 0.4-1.0%.
316L stainless steel interior cladding and rectifier rolls.
Interior surfaces electropolished to 4 micron finish.
Left hand machine
configuration. |
| H093233 |
Used 293" (7.44M)
Valmet Sym-Nozzle headbox for fine paper design conc. 0.6%, flow 22,075
gpm. Design speed 3000 fpm.
Slice opening range 0.394" to 1.722", cleaning position
up to 4". Top slice horizontal adjustment 0" to 0.98"
maximum recirculation 10%. Backside
header, one side inlet. |
| H095323 |
One (1) used Valmet
294.7" (7.46M) pressurised stainless steel headbox 3000 FPM, 22,075
GPM. Sllice opening is
.03-17" with a jet width of 292". |
| H096596 |
Used Voith type W6500
(high turbulence) headbox. 8000
mm (312") wide. Capacity
reported approximately 24,500 - 60,800 liters per minute (aprox. 6472 -
16062 gpm). |
| H096146 |
Used Voith type W1
stainless steel, size 11500 headbox with a 313" (7.93M) pond width.
Has turbulence tube banks, integrated air pad with overflow and
adjustable flexible top lip. Design speed 3000 to 4500 FPM.
Left hand. Last used
on a machine making 27 - 47#/3300 sq.ft. paper, 243000 TPY.
Throughput ranges from 12300 GPM to 24600 GPM. |
| H096754 |
One (1) Used 8.01m
(315") Valmet Sym-Flo Headbox. 1300m/min, LWC Paper, 30-47gsm,
500tpd, Max Flow: 1370l/s, 0.6% consistency, left handed drive. |
| H093920 |
Used 320" (8.13M)
pond Beloit headbox. Has 3
rectifier rolls. Prev. doing
450 tpd of fine (printing) paper, 2200 fpm.
Previous product was 40# to 60# for 500 sheets of 25" x
38" paper. Stainless
steel lined. 312" wire length (312" slice). |
| H094526 |
Used Valmet Symflow
headbox with a 9000 mm (354") pond.
Designed for 1400 mpm. Material
of construction is T316 stainless steel.
66 slice screws. ABB linear stepper actuators.
Polished T316 stainless steel approach piping with 2 Valmet elbows.
With a model 30-DLB-31A Warren pump.
Pump is rated at approximately 36,000 GPM @ 117' TDH. |
| H096220 |
Used Valmet 364"
(9.25M) slice pressurized headbox. Maximum
24090 gpm (1520 l/s), minimum 12045 gpm (760 l/s). Detailed specs available. |
| H094788 |
Used 9300 mm pond
(366") Voith headbox, previously producing printing and writing paper
57-90 GSM at 550 - 800 meters/minute. Design flow rates 90,000 - 109,000
liters/minute. |
