|
Paper,
Board & Tissue Machines
While we
attempt to maintain accuracy, we strongly suggest you contact Acme to determine
if the item(s) you see are still available for sale. We will try to update
monthly, but if you don't see what you are looking for, please contact us. We
may already have what you need, or we can do a global search and find it for
you.
| A098141 |
Used 1660 mm
(65) trim tissue machine manufactured by Beloit in 1962. Produced 5,000 TPY
( 1 TPH) of tissue napkin 16-28 gsm at 1100 MPM. Stock prep includes: 20 cu
mt Grubbens s/s pulper; w Vargo beaters; 3 24P pressure screens; etc.
Machine includes Beloit pressure flowbox, s/s lined; cantilevered s/s
fourdrinier; suction pick up, 2 press sections one withsuction roll;Voith
Yankee dryer 2100 mm face, 3658 mm (12) diameter, 8.6 bar; Measures 2200-3
scanner; Beloit horizontal reel; sectional electric drive; and Measurex 2002
scanner for moisture/gsm and ash. Beloit rewinder, Trancell roll wrapper
(1991) and more. |
| H092515 |
One (1) Used Paper
Machine 1.75m (68") Yankee Tissue.
Operating speed: 240mpm - 350mpm.
Basis wt range 30-32gsm. For
Toilet Tissue or Towel-Machine complete with Lamort Stock Preparation 12m3
Pulper (Hi-cores). Approach flow, Lamort Screening, Wire Section 18.4m
long Yankee 3m Dia. (1986) with Presser Roll.
Hi-vel Hood(Brunschweiler) with heat recovery, also 2.5m Dia
Pre-dryer. 1987 Bellmer Reel-up(as Beloit) producing 1.5m Dia Jumbos. ED.C.
Drive System. Process contro; by Fisher-Univox. Vacuum system by Siemens-Elmo. Converting plant including:-
Rewinder, Core Maker, Embosser, Log Saw Packing and Wrapping. |
| H094304 |
Used twin wire paper
machine designed to make Bristol/cover grades, 122 to 395 gsm, 42 tpd, 340
fpm. 58.75" minimum trim
width. 72" maximum trim
width. Due to the twin wires,
top & bottom sides are similar, not "two sided". Machine includes:
Two, open type headboxes
Brass, suction couch rolls, 4
suction boxes, 10"
dia. X 90" face
dandy roll for each wire
3 press section and a smoothing press
Fifty, 48" dia. 30 psi dryers (some are 15 psi)
Vertical size press, rubber top & bottom rolls
21 roll Hunt & Moscrop calender with top & bottom swimming
rolls, 14"
dia. x 80" face. Intermediate rolls are 13" dia. X 80" face
30 hp 11800 rpm dc motor & controller
47" reel dia. with 3 reel bars
Winder is a double drum Pussey & Jones, 1500 fpm, a/c drive, 4
rolls, minimum roll
16.75" Lineshaft drive and core pulleys, manual grease
lubrication refiners,
cleaners, hycor dewatering screen. |
| A098029 |
Used 1960 mm
(77) trim tissue machine, last producing 29 MTPD of 14 35 gsm toilet ,
kitchen towel, napkin, and facial tissues at 750 mpm. Machine includes:
pressurized headbox; cantilever type wire part with suction breast roll; 2
presses, first press blind drilled 85 KN/m maximum and second press blind
drilled with 90 KN/m; Hoesch yankee dryer, 3200 mm (126) diameter, 5 bar
pressure (10 bar test); 700 mm reel drum; drying hood; steam and condensate
system; and more. Stock preparation includes 16 cu. Mt. pulper; 2 high
density cleaners; RTD 20 Pilao refiner; and Kadant-Lamort S.P. 800 N
pressure screen. Rewinder (950 mpm) with 3 unwind stations with calenders,
etc. Full details upon request. |
| H096248 |
Used Pusey & Jones
2.06 meter trim fine paper machine capable of producing 40 - 330 GSM fine
paper. Maximum speed 130
m/min., maximum capacity 1.9 ton/hour.
Machine includes:
2.3 meter wide Hogenkamp closed headbox
2 plain presses 1
smoothing press (12)
1.4 m dia. dryers in two groups inclined size press
(4) 1.4 m dia. After dryers
2 roll Basagoitia calender, variable crown Coghlan reel,
Jagenberg model 26-12 winder with maximum width 2.6 m, maximum roll
diameter 1.5 m. |
| A097859 |
Used 2100 mm
(82.7") trim tissue machine made by DGI in 1980 runing at 600 mpm with a
4500 mm diamter yankee. Includes: Lamort SP 600 vertical screen; stainess
headbox; 1100 mm diameter former; felt width 2240 mm; automatic tensor;
inclined wire; dryer after pick up 50/70%; suction press roll; high efficeny
hood; and pope reel.
 |
| A097850 |
Used 2100 mm
(82.7) trim fourdrinier paper machine last producing 50-60 TPD of wrapping,
packing and fluting papers 60-250 gsm at about 150 mpm. Stock prep included
pulpers, high density cleaners, deflakers, conical refiners, screens, etc.
The paper machine was originally made by Voith and has many rebuilds and
updates. The machine includes: Open stainless steel headbox; cantilevered
stainless fourdrinier with 14 rolls, 7 vacuum boxes, suction couch roll; 3
plain presses with top granite rolls and rubber lined bottom rolls; 11 pre
dryers 1200 mm diameter x 5 bar pressure (1988); MG cylinder is 3200 mm with
2 press rolls (old non pressure dryer); 4 post dryers as pre-dryers; Escher
Wyss hydraulic pope reel with 1000mm drum; Ward Leonard drive; Voith type
vacuum system and condensate system. Also included is a 7 ton/hour steam
boiler; slitter rewinder; Jagenberg sheet cutter and more. |
| A097289 |
Used 2140 mm (84")
trim fourdrinier paper machine last producing 10,000 MTPY (30 MTPD) of 45
- 120 gsm printing, hanana, newsprint and writing papers at 160 MPM (up to
200 MPM). Machine includes high pressure headbox, stainless steel, with
cross direction control of upper lip, level and flow control, 2
deflocculation rolls; wire part 2400 mm wide with 2 rolls, 2 wet boxes and
5 suction boxes, suction roll and dandy roll; three press sections, first
with rubber and stonit, second with polyurethan and third is offset with
stonit and rubber; 20 dryer cans 1250 mm dia (3 bars); steam condensing
system and cloosed hood; 6 roll calender with hydraulic thrust; pope reel.
Machine may also include some stock prep. Spares and controls. |
| XA098205 |
Used 2200 mm
(86") fourdrinier coated board machine designed to produce 180 - 190 TPD
coated board, 200 - 500 GSM at a maximum speed of 250 M/minute. Machine has
2 coating systems and a size press. Also includes a mill with rewinder;
convertin plant; Jagenburg sheeter; and 4.8 MW cogeneation plant. Full
details and equipment list available upon request. |
| H093454 |
One (1) used Escher-Wyss
86" (2.20M) trim Yankee Fourdrinier Tissue Paper Machine.
Speed: 975 FPM (300M). Grades:
20-50 GSM. Capacity: 30 T/D.
- Hogenkamp headbox - 99" (2.52M).
- Fourdrinier table - stainless steel cantilevered 2.64M x 9.30M. - Press section - 2-roll pick-up press.
- Yankee press roll 492MM x 2.670M face
- Yankee drier 3.6M dia. x 2.75M face 3.5 bar
- High velocity hood
- (2) After driers 2.5M dia x 2.65M face 3.5 Bar.
- Accurray system .... (Paper Machine - can be offered rebuilt.) |
| H092794 |
One (1) used Manchester 86" (2.20M) trim fourdrinier
paper machine. Speed: 975 FPM (300M). Grades: 50-120 GSM. Capacity: 50
T/D. Major rebuild in 1994. Machine includes: open headbox; fourdrinier
with 6 hydrafoils, 19 dewatering rolls and 7 suction boxes; three presses;
16 dryer cans 48 diameter 4 bar maximum pressure; 4 roll Kuster calender;
pope reel 700 mm diameter; line shaft drive; vacuum pumps; basis weight
control system; and spare parts. |
| A098173 |
Used 86
(2.2 M) Wagner Dorries fourdrinier paper machine, last producing 24 TPD or
10 160 gsm wrapping, office and kraft paper running at 135 mpm. Machine
includes: air padded, all stainless steel headbox; fourdrinier with
stainless steel main beams; couch press; 3 press sections; 9 dryer cans 1500
mm diameter; 126 (3.2M) dia MG cylinder, 2.5 bar; Hung & Moscrope calender
with swimming rolls crowning on the bottom cylinder; Pope reel; lineshaft
drive; 7 vacuum pumps; and spare parts. Stock preparation includes pulpers,
refiners, and screens. Sketch and photos available. |
| A097701 |
Used 2.2 meter (86.6")
deckle paper machine previously producing 70-250 gsm of security papers,
tinted papers, high bulk and text and cover papers at speeds of 75 - 230
M/min. Machine includes: Dixon Saxton pressure headbox; fourdrinier; (2)
Beloit straight feed vetical press sections at 60 psi; (5) dryer cans 54"
dia; (17) 48" dia dryer cans; size press with fixed top and moving bottom
roll; (8) 47" dia dryers; Hunt & Moscrof 3 roll Kuster stack; Accuray 1180
process control system. Also available are refiners. |
| A097702 |
Used 2.2 meter (86.6")
deckle paper machine previously producing 40-220 gsm runing 120 - 230
meters/min of smooth label base, gumming base, opaque printing and tinted
papers. Machine includes: Bertram Sciennes pressure headbox; fourdrinier;
(2) Bentley & Jackson straight feed vertical press sections; (20) 60" dia.
dryer cans; size press with fixed top and moving bottom rolls; (8) 60" dia.
dryers; Hunt & Moscrop 3 roll Kuster stack; Accuray 1180 process control
system. Also available are refiners. |
| A098130 |
Used 2200 mm
(87) trim Fourdrinier paper machine used on 115 290 gsm wood free base
paper at 50 200 m/m. Includes Voith 1989 headbox; Bellmer 1991 wire
section with Finckh dandy roll; suction press, turn suction press and
smoothing press; 24 drying cylinders 1250 mm, and 1 cooling cylinder, 2.5
bar; Scheufelen size press; 3 roll Dusters machine calender; and Bellmer
pope reel. Stock prep included. |
| H095424 |
Used 88" trim Pusey
& Jones single cylinder paper machine previously producing 15 TPD
crepe paper at 700 FPM, or 10 TPD of tissue at 400 FPM. Machine includes a
2 nip calender and a winder. |
| A098297 |
Used 2400 mm
(88") trim board machine last producing 100-110 TPD or 300-700 GSM. Machine
includes: 6 Celli mould forming cylinders; suction press 2 presses; 7 dryers
1500 mm; 4 dryers 1250 mm;5 dryers 1250 mm; MG cylinder 3200 mm dia; 8
dryers 1250 mm; all dryers are 3 bar; QCS system. Also includes stock prep. |
| A098122 |
Used 2250 mm
(88.5) trim Fourdrinier paper machine last producing 150 TPD of 70 200
gsm fluting and 325 gsm grey board at 450 mpm. Machine includes stock prep
such as pulper, drum thickener, refiners and screens. Machine includes: Air
cushion headbox with Honeywell Thermatrol system for lip adjustment; wire
part with breast roll Flo-Vac system, suction roll; first press suction
(double felted); 2nd press blind drilled & grooved polyurethane single
felted; 3rd press jumbo, double felted; 5 dryer groups to include 38
cylinders with Thermo compressor system, 4.2 bar and steam condensate
system; Fampa 3 roll machine calender: Fampa pope roller; Honeywell Measurex
2002 ET for grammage and moisture; Fampa rewinder, PLC controlled; and 8 ton
crane. |
| A097845 |
Used 88.6"
(2259 mm) trim board machine to produce 110 tpd (35,000 tpy) of coated paper
board GD2 & GT basis weight range 270 - 600 gsm at 120 meter/min. System
includes 3 independent and fully automated stock preparation lines with a
total capacity of 170 tons per day. The machine includes: a fourdrinier wire
with foil boxes and 3 sucion boxes for the top one and ; 6 wire formers (VAT
cylinders) for back and middle layers; all head boxes are 304 stainless
steel and the back suction former and 3 middle suction formers are BRDA-HORNE
pressurized type; double felted first press by Carcano; double felted jumbo
press by Over Meccanica; single felted offest press by Carcano; 21 pre-dryer
cylinders, 1250 mm diameter with Cascade steam and condensate system for 3.5
bar pressure, Brunchweiler hood with heat recovery; 3600 mm diameter Carcano
Yankee cylinder; 10 post dryer cylinders, 1500 mm diameter with energy hood
and heat recovery; Maule 4 roll machine calender with bottome Kuster roll;
coating sections include Bachofen Varibar coater for top line, Jagnenberg
blade coater for top line, Bachofen MB coater for back line, 5 Solaronics
infrared hood, cooling section and 4 cooling cylinders; Carcano 2 roll
machcine calender; Acuray 1180 Micro process control to control moisture,
wet and dry, grammage and thinkness; 1899 mm diameter pope reel; drive for
all section mechancally, right side in running direction. |
| A098180 |
Used 2300 mm
(90) trim Gorostidi and DGI coated board machine, 220 540 gsm at 250-300
mpm and a capacity of 130 150 TPD. Machine includes: 7 suction formers;
(2) suction presses with 1 felt, 1st inferior felt and 2nd superior felt,
with frames and rolls; (2) presses with double felt built by Gorostidi;
First dryer section, composed by: 16 dryer cylinders table with 2.500 and
diameter 1.500 mm, press work 3,5 bar; Yankee cylinder diameter 3.200 mm,
press work 3 bar with 1 press, with close hood; Second dryers section
composed by 10 dryers cylinders table width 2.500 mm and diemater 1.500 mm,
press work 5 bar; 1 nip calender machine; Coating station, composed of (2)
Bachofen Meier barflex, table width 2.400 mm and diameter 400 mm, with
Solartronics panels, Air Knife Bachofen Meier, table width 2.400 mm, and
Dryer tunnels; Last dryer section, composed by 5 dryer cylinders table width
2.500 mm and diameter 1.500 mm, press work 5 bar.; 1 nip calender Kόsters
installed new in 2006; Pope reeler installed new in 2006 with automathic
changed spools, maximum diameter of the reels 2.000 mm; (3) Grubbens broke
pulpers; vacuum pumps; and a Cellier coating kitchen. Machine installed in
1982 with upgrades in 1990, 1996 and 2007. |
| A098293 |
Uned 2300 mm
(90") trim fourdrinier paper machine last producing 70 TPD and 500 MPM.
Machine includes: fourdrinier with 1000 mm dandy roll; 3 presspresses; 18
dryers 1500 mm diax 3 bars; MG cylinder 5000 mm dia; 9 post dryers 1500 mm
dia x 5 bars; hood with heat recovery system Measurex-Honeywell QCS; and
pope winder. Left hand drive. Includes stock prep. |
| A097838 |
Used 2300 mm
(90.5) trim fourdrinier paper machine capable of producing 100 ADMTPD at
100 GSM of coated fine paper, printing, writing, and fluting with a range of
70 250 GSM at 320 MPM. Manufactured by Bruderhaus, Carcano, Freira,
Beloit, Black Clawsosn and Chamflex with its last upgrade in 1996, this
machine includes: Freiria pressurized headbox; 9950 mm long wire part with
fourdrinier with forming board, hydro foils, suction boxes; two suction
presses from Carcano and Freiiria; 20 pre dryers; Patton size press; 6 post
dryers; Black Clawson damping calender; Camflex in line coater with 1st
layer with cylinder coating roll and 7 drying rolls and 2nd layer with
cylinder coating roll and 5 drying and 2 cooling rolls; unused gas heated
infra red dryer; Carcano machine calender; pope reel with automatic reel
change; closed type dryer hood; sectional drives with electromagnetic
brakes; and spare parts, controls drawings, etc. This machine was overhauled
and new equipment installed just before the mill closed. |
| XA097631 |
Used plant for fluting
and test liner production, 40 TPD, 2300 mm (90.5") trim, 80-250 gsm.
Includes stock preparation with pulpers, screens, etc. 4 cylinder board
machine with 1125 mm dia vats, 2 staight presses, reverse press, 11 drying
cylinders 1250 mm dia, 4 cylinders 1500 mm dia, 1 MG Yankee 3000 mm diameter
with press roll, pope reel, drives and 2 drum winder. Pumps, controls drives
and boiler available. Electrics were installed in 2001. |
| A097620 |
Used 2345 mm wide, 2300
mm (90.5") trim fourdrinier paper machine last producing 100 TPD, 90-140 gsm
at 310 m/min. Machine includes: Hogenkamp headbox, fourdrinier wire section;
3 straight through press sections with 1st press at 40 KN/m, 2nd at 75 KN/m
and 3rd at 100 KN/m; 49 dryers 2.5 bar some built in 1976; Dorries pope
reel; and Bruderhaus 1000 m/min slitter winder. |
| A097247 |
Used 2300 mm (91")
trim Allimand fourdrinier, cigarette machine last making 5 tpd of 13-25
gsm at 170 mpm. Machine includes: open Hoggenkemp headbox; conventional
wire with breast roll, forming board, 16 single foils, 3 low vacuum boxes,
2 table rolls, 4 flat boxes; suction couch roll; shake unit; suction press
and second straight press; (5) 1200 dryers; (2) 1600 mm dryers; (8) 2500
mm dryers all 2.5 bar; inclined size press; (4) 1200 mm after dryers 2.5
bar; vertical reel. |
| A098298 |
Used 2420 mm
(95") board machine last producing 70 TPD of liner-fluting, grey board and
white/grey board 80-400 GSM 200 MPM. Machine includes: 3 hould former
cylinders; 2 presses; 9 dryers 1500 mm dia; yankee cylinder; and pope
winder. Also includes stock prep, rewinder, boiler, etc. |
| H096508 |
Used 2.45 meter cylinder
machine previously used to manufacturer wrapping papers from 100 to 300
gsm @ 100 meters per minute and producing 40 to 42 tons per day.
Machine includes:
cylinder mould 1,250 mm diameter by 2,800 mm face;
2 press sections;
(6) pre dryers 1,250 mm diameter by 2,750 mm face, 4 bar pressure; Yankee cylinder 3,000 mm diameter by
2,800 mm face, 4 bar pressure;
pope reel; rewinder; heat recovery hood over pre drying and
over Yankee; drive,
some pumps, controls etc. |
| A098085 |
Used 2450 -
2500 mm 3 cylinder paper machine last producing 70 tpd of 110-180 gsm
fluting paper, or white top fluting paper at 180 mpm. Machine includes: 3
Finkh cylinder moulds, s/s; double press section; gas heated Float dryer by
Dornier with 9 drying chambers; 2 glacing cylinders; measuring device for
moisture and thichness (2002); and pope reel. Stock prep may be available
serparately. |
| A098086 |
Used 2450 -
2500 mm 3 cylinder paper machine last producing 45 tpd of 110-180 gsm
fluting paper, or white top fluting paper at 180 mpm. Machine includes: 3
Finkh cylinder moulds, s/s; double press section; gas heated Float dryer by
Dornier with 4 drying chambers; 2 glacing cylinders; and pope reel. Stock
prep may be available serparately. |
| A098296 |
Used 2510
mm (98") Fourdrinier paper machine for liner, fluting and kraft papers,
103-105 TPD of 100-190 GSM at 275 MPM. Machine includes: Over Meccanica open
headbox; Fourdrinier; breast and suction douch rolls; 2 felt sections; 21
pre-dryers 1500 mm dia; 12 post-dryers 1250 mm dia; inclined size press;
pope winder; and rewinder. |
| A098294 |
Used 2500
mm (98") Fourdrinier paper machine last producing 42000 TPY of 50-240 GSM at
540 MPM average. Machine includes: headbox; fourdrinier 44 drying cylinders
x 3 bars; Voith size press; presses; Measurex QCS; and pope reel. Also
includes stock prep,2 boilers, etc. |
| A098285 |
Used 2500
mm (98") trim sack kraft or creped kraft liner fourdrinier paper maching,
producing 130 TPD of 80-200 gsm at 600 mpm. Machine includes: Carcano
headbox; fourdrinier with 800 mm diameter dandy roll; 3 Over Meccanica press
sections; Voith 4 roll size press; 28 pre and 10 post 1500 mm x 5 bar
dryers; Over Meccanica rewinder. Also includes wrapping and weighing machin,
steam boiler and stock preparation. |
| A097858 |
BELOIT FAMPA,
2500 mm trim, wire width: 2700 mm Max speed: 400 m/min Max capacity: about
20 Tons/day Grammage: 20-40 gr/m2 Max reel Ψ: 1800 mm Parts of the machine:
- Head box Converflo type - Wire Cantilever system, wire length: 14.800 mm
with: breast roll (Ψ 510 mm, length 2800 mm) forming box couch roll (Ψ 510
mm, length 2800 mm) 3 hydro-foils 3 suction boxes - Press Section: Pick-up
roll Kasten type First press, Venta-nip type (linear pressure 589 N/cm)
Second press - rubber roll blind drilled in contact with the Yankee cylinder
11 felt rolls 2 spiral felt rolls 3 felts suction boxes - Dryer Section: 1
Yankee cylinder Ψ 2400 mm, length 2675 mm, with doctor blade and cleaning
blade (steam pressure 9 bar) 5 dryer cylinders (Ψ 1500 mm, length 2650 mm,
steam pressure 3 bar) Pope winder, with drum Ψ 610 mm, length 2700 mm High
efficiency hood for the Yankee cylinder and semi-open hood for the dryer
cylinders Steam-condensate plant Vacuum plant with 4 vacuum pumps type WP40
- S (40 mc/min) Stock preparation with hidropulper, tanks with agitators,
pumps for pulp and white water, centricleaners and centriscreens for waste
paper. Water, steam, electric energy and compressed air plants |
| A098123 |
Used 2500 mm
(98) Fourdrinier machine last producing Flutting and Straw Flutting, 90
175 gsm, 220 tpd at 130 gsm, at 600 mpm. The machine is driven from the wire
to Pop reel via Siemens PLC control. Stock prep includes pulper, poire,
cleaner drum thickener, refiners and screens. The machine has a top Bellbond
former. For the 2nd layer there is a second headbox in front of the Bellbond.
Machine includes: Hydraulic Converflo Concept III headbox with Honewell
Thermatrol system; Cantilever fourdrinier with breast roll, pneumatic wire
guide, tension, Honeywell Devroniser system with 19 actuators; 3 press
sections; 4 dryer groups with 49 cylinders 1500 mm, 5 bqar; 6 roll Fampa
machine calender; Fampa pope reel; Fampa rewinder; Honeywell Measurex for
grammage and Moisture (QCS); and 2 cranes. |
| A098003 |
Used 2500 mm
(98) trim fourdrinier paper machine last producing 112 190 GSM at 450
285 MPM. Machine Includes: Closed head box with dilution Basagoitia built in
2000, slice width 2.750 mm, hydraulic capacity 26.400 l/min with 32
regulators manual; Cantilever fourdrinier built by Allimand, installed in
2000, breast roll diameter 410 mm and table width 3.100 mm, mottled, 5
hydrofoils 1.100 / 510 / 280 mm number of foils 9+5+5+4+4, 5 vacuufoils 520
/ 810 / 465 mm numbero of foils 5+7+5+5, 1 double + 6 suction boxes 1 x 740
/ 4 x 280 / 2 x 360 mm; Suction press roll diameter 824 mm and width
aspiration 2.850 mm, diameter of the holes 6,5 mm; Felt rolls 6 diameter 260
mm and table 3.108 mm; 1st press section plain, sup 1 press 530 mm / 2.960
mm, botton 2 press 510 mm / 2.960 mm, press maximum 55 kg/cml; 2nd press
section plain, sup press 615 mm / 3.100 mm, inf press 610 mm / 3.100 mm,
press maximum 85 kg/cml; 3rd press section plain, sup press 585 mm / 3.000
mm, inf press 600 mm / 2.980 mm, press maximum 85 kg/cml; Felt stretcher and
guides; Dryer section composed by 4 sections totalling 30 cans 1500 mm
diameter 6 to 8 bar pressure; Pope reel diameter of the drum 1.150 mm and
table width 2.700 mm, 5 spools diameter 340 mm, hydraulic and pneumatic; and
sectional drive built by ABB. |
| A097854 |
Used 2500 mm
(98") trim Carcano 4 vat cylinder machine last used to produce 80 tpd of
fluting and testliner 90-300 gsm at 250 mpm. Machine includes 6 dryers, 3
bar 1500 mm diameter; 2 dryiers 5 bar 2000 mm diameter and 2 Toschi
cylinders 10 bar, 2000 mm diameter; 3600 mm diameter yankee by Over, 5 bar.
Includes stock preparation with pulper and refiner, Krofta waste water
treatment and steam boiler. |
| A097399 |
Used Neur Bruderhause fordrinier paper machine2530 mm (99.6") trim at the reel built in the mid '80's to produce 8.6 tons per day of 10-60 gsm paper for tea bags or filter paper. Machine includes slitter winder, and stock prep. Full detail available upon request. |
| A097248 |
Used 2520 mm (99")
trim cigaretee paper machine last producing 4 tpd of 16-30 gsm at 40-120
mpm. Machine includes: open headbox; table rolls, suction boxes and foils;
suction couch with 2 suctio boxes; open draw presses with rubber covered
bottom and granite top rolls; (10) 1500 mm dryers; (5) felt dryers 1000
mm; DC drive with thyristor control; winder, etc. |
| A097855 |
Used 2570 mm
(101") trim twin wire machine by Carcano and Comer previously making 140-150
tpd of fluting and testliner at 500 mpm. Machine includes: Comer headbox to
supply 70-140 gsm; second Comer headbox to supply 30-60 gsm; two Over
presses with 610 mm diameter rolls; 28 drying cylinders 1500 mm diameter;
Mesurex - Honeywell control unit; Over pope reel with 1800 mm diameter reel;
Brunschweiler drying hood; Toschi model RB-90 slitter rewinder 1500 mpm max
speed, 2600 mm working sidth. Also included is stock prep pulpers, cleaners,
refiners, etc and a power plant new in 1999-2000 to produce 15,000 kg
steam/hour and 4,000 kW. |
| A097629 |
Used 2610 mm (103") trim
Neue Bruderhaus fourdrinier paper machine last producing 8.6 TPD of tea bag
and filter paper 18 gsm, with a range of 10-60 gsm. Pope trim is 2530 mm
(99"). Can produce one or two layers. Full specs, sketch and photos
available. |
| A097793 |
Used 2.62
meter (103") trim board machine manufactured by UDDEVALLA MEKANISCA VERKSTAD
AB last running at a speed range of 100-250 meters per minute to produce
160-300 gsm, 150 tons per day. Forming section includes 5 sectional dry vats
and a mini fourdrinier. There are 2 press sections, 24 dryers, MG dryer, 12
post dryers, 2 coaters, starch sizing, calender and reel. Full specs and
photos available upon request. |
| A097856 |
Used 2649 mm
(104") trim Toschi tissue machine last producing 28-32 tpd of 17-50 gsm at
650 mpm. Machine includes: Toschi ECT2 headbox xcreen; pressurized headbox
with auto level and pressure control; cantilever wire table with 500 mm
breast roll; stretch roll on torpress with adjustment and 1 fixed adjustable
stretch roll; 825 mm suction press roll;2500 mm diameter yankee dryer, 5 bar
and hood with natural gas burner; pope reel with 500 mm diameter reel;
Cameron 700 mpm slitter rewinder. Stock prep includes pulper, high density
cleaner, screens, deflaker, refiner. There is also a flotation water
clarifier, sludge press, steam boiler and pumps. |
| A098241 |
Used 2650 mm
(104") Black Clawson tissue machine to produce 55 TPD of 17 - 50 gsm at 800
MPM from 100% virgin pulp. Installed 1969 with rebuilds in 1980, '84, 2000
and 2004. Machine includes: headbox pump and verticle screens;
Hydro-Flow-240 headbox; fourdrinier (by Talleres Gorostidi); suction press
roll; drilled press; 3177.5 mm (125") diameter yankee dryer, 6.2 kg/cm2;
pope reel; and Talleres Tolosa rewinder. |
| A098115 |
Used 2700 mm
(106) trim M.G. paper machine and line previously producing 3.8 TPH of
envelope and bag papers 34 100 gsm from recycled papers, 160 600 MPM.
Stock preparation includes pulper, Krima C line, de-inking cells cleaners,
screens, thickener, and refiners. Machine includes: Overmeccanica
pressurized stainless lined flowbox; stainless steel,catilevered fourdrinier;
Overmaccanica press sections with suction pick up roll (first press being a
combination press, double felted, top roll 560mm diameter and face 3100mm,
max pressure 382 pli, centres are 3780m, suction roll approx 600mm diameter.
The second press is a blind drilled press, top roll 1000mm diameter face
3050mm , load is 100 pli. Both presses are pneumatic loading. All rolls are
on A/F bearings.); (7) Westbury predryers 1500 mm diameter operating at 90
psi; Beloit 6000 mm diameter, 3080 mm face M.G. cylinder new in 1982,
running 68 psi; Westbury after dryers at 45 psi; Honeywell canner
controlling moisture and GSM; Bertrams horizontal reel (rebuilt 1982);
sectional electric drive; broke pulper; pumps; Jagenberg Vari-Dur two drum
winder 2800 mm working width, shaft unwind; and floor mounted reel scale
with LED read out. Specs available upon request. |
| A097401 |
Used 106 (2700 mm) trim tissue machine with Beloit wet end and Escher Wyss dry end. Maximum speed wet end 1.200 m/min Maximum speed dry end 600 m/min Production speed 500 m/min Basis weight pope 18-25 g/m2 Production 35 MT/day Formation Beloit inclined wire with suction breast roll Headbox Hydraulic with Fan-pump SCANPUMP Wire Cantilever Pick-up Ceramic tips and pneumatic swing Presses Suction Press ESCHER WYSS 3 vacuum zones 750 mm diameter 1 shelf spare part Blind drilled Press500 mm. diameter Yankee Flat internal 3.600 mm diameter, 4,5 bar steam pressure Cast iron metallized. Last grinding April 2001 Hood BRUNNSCHWEILER Gas fired 360Ί C max. temperature. Pope reel ESCHER-WYSS 1.700 mm max. diameter reel Drive ABB analogical TYRAC-8. |
| A098140A |
Used 2700
trim (106") tissue machine as part of an entire tissue mill that is for
sale. See A098140 for additional details. Full list available. |
| A097783 |
Used 2.7
meter trim board machine previously producing 10-12 tpd of special board for
various industries and pressboard for electro industry 900 - 3300 gsm at
50-60 meters per minute. Built in 1974 with several rebuilds, this machine
includes: forming vat with 2 spare vats; couch roll with pneumatic lifting,
felt (13,0 x 2,7 m) with clamping unit, size roller, breast roll, permanent
pressure reduction for better surface; size roller; - flatbed press,
completely reconstructed 1998, with high-pressure pumps, water-operated;
controls are concluded in one SPS control unit Klφckner-Mφller, built 2000;
2 pair of longitudina knife cutters and 2 cross cutter; 3-level dryer,
steam-heated, 2 drying zones with separate temperature control,dryer
completely reconstructed 2001. Stock prep includes pulper, 4 refiners,
pressure separator, pumps and waste water floating unit. Certuss steam
generator built 1992. |
| A098286 |
Used 2750 mm
(108") trim Toscotec tissue machine producing 60 tpd of 17-40 gsm at 1000
mpm. Machine includes:fourdrinier; breast roll; couch roll; yankee cylinder
3600 mm (141" dia; blind drilled press; and pope winder. New 1992 and
rebuilt in 2008. |
| A097775 |
Used 3300 mm
wide, 2850 mm (112") trim Bruderhaus fourdrinier paper machine last
producing 10 tph of 170 gsm base paper at 380 mpm. Machine includes:
pressurized headbox; fourdrinier web forming with dandy roll; 3 press
sections; 37 dryers divided into 10 groups and 3 IR dryers; Billblade
coating stations; Escher Wyss rewinder; 2 calenders; pope reel; pneumatic
and electronic instrumentation; Measurex 2002 process controls system. Full
specs available upon request. |
| A098199 |
Used 2.95 M
(116) top former paper machine last producing 205 TPD, at 365 MPM, writing,
printing and coated papers in sheets and reels, 80 235 GSM. Machine is
capable of running 150 400 MPM with gear type drive with sectional
electric drive. (Drive is on right side.) Machine includes: cantilevered
stainless wire frame; top Tampella former; four presses (20 kn/m, 35 kn/m,
80 kn/m and 30 kn/m (smoothing press); four dryer sections with a total of
29 cans 2.4 bar; under machine pulper; electrical infra red dryer before
precoater; Valmet Damatic scanner; twin HSM (from BTG) coater; Ircon infra
red 7 zone dryer; fifth drying section; twoJagenberg Combi Blade top coaters
each with infra red dryers; horizontal reel up with shell auto change,
pumps, etc. Also available is a supercalender and/or rewinder. |
| H092788 |
Used Beloit 117"
trim paper machine previously produced 60 TPD of coated magazine grades,
40 to 80 pound at 800 feet per minute. Machine includes: Rebuild and modified headbox 66'-6" long x 124" wire, foiled
table, 6 flat boxes, dandy roll and knockdown fourdrinier Dual
suction press with center granite roll
Dryers include (25) cans 48" diameter, 30 psi non coded and
(2) 12' diameter Yankee dryers
Plain 2 roll calender
DC drive to belted line shaft and MG set
Measurex control system and (2) coater stations between dryer
sections |
| A097863 |
Used 3100
(122") trim fourdrinier paper machine last producing up to 55 tpd of
satinated paper 50-180 gsm. Machine includes: Isoflow Neyrpic headbox
(installed 1988); wire framing (1998-2001); breast roll; forming table;
dandy roll; press includes suction press, bottom press and 3 top presses; 2
dryers 1500 mm and 5 cylinders 1250 mm diameter; 3600 mm diameter MG
cylinder (2.5 bar); 4 post fryers 1500 mm (5 bar); pope reel; and QCS
system. Full specs upon request. |
| A097861 |
Used 3100 mm
(122") trim Voith MG paper machine producing 14-25 tpd of ream paper and
industrial tissue (30 gsm napkins and towels) or 40-90 gsm material at 120
mpm. Machine includes; pressurized headbox; cantilevered fourdrinier; 700 mm
couch roll; 2 presses; 3200 mm diameter Yankee and pope reel. |
| XA098242 |
Used 3120 mm
(123) trim Beloit Walmsley paper machine to produce 50,000 TPY of 100%
coated base papers, label base papers (coated one side) and single coated
papers. Current ranges coated base: 50 to 120 gsm and forms grades 45 to 80
gsm. Includes: stock preparation; 3120 mm (123) deckle paper machine;
calenders; and rewinder. Full equipment list available. |
| A097364 |
Used 124
(3150 mm) trim Doerries Fourdrinier-yankee tissue machine, 350 mpm working
speed, 600 mpm design speed, 17 -45 gsm hard tissue, single sided papers at
about 30 tons per day with rebuilds by Beloit and a total rebuild in 1990 by
OverMeccanica. This line includes a new approach flow system (full details
available upon request). The machine includes: new Over headbox, 3350 mm
slice width with basis weight and control valves; Dorries flat wire with 5
single foils and 9 suction boxes; 800 mm diameter suction couch roll; 800 mm
combined suction pick-up press; 4500 mm diameter 3600 mm face Yankee dryer
(ASME stamped); Spooner Yankee hood; 650 mm suction press roll; 900 mm
suction press roll; Accuray scanner; steam and condensate system; Over
grooved durm reel; Reliance sectional electric drive with 6 in-drive points;
8 vacuum pumps; and 2 broke pulpers. Also included is an Over tissue slitter
rewinder, 3200 mm trim, 3750 roll face, 1500 m/min speed, with swimming
crown roll, roll ejector, reel lowering table, edge trim recovery system,
Reliance DC drive, 4 off belt driven unwind stations, grooved rewind rolls,
reel transportation system from the machine to the rewinder. |
| H094966 |
Used Beloit fourdrinier
type paper machine last producing 80 TPD coated magazine grade paper, 50#
- 80#/3300 sq.ft. With
coater. 1000 FPM.
Machine has the following: -Valley
Iron Works pressurized headbox -140" wide x 75'6" long wire
-Dual suction press. Separate
felts. -(43) 48" dia. dryer cans, (2) 24" dia. dryer cans, and
(1) 60" dia. dryer with anti-friction bearings. -2 roll calender
-Horizontal track reel -Sectional electric drive -(2) Beloit
Blade coating stations, breaker stack -Measurex system, pumps,
motors, vacuum system, condensate system
Some stock preparation equipment available, such as a Bauer 3 stage
cleaning system, Black Clawson 24P Selectifier screens, and Clark &
Vecarrio deculator cleaners. |
| H095104 |
Used Beloit 127"
trim paper machine previously produced 150 TPD of coated magazine grades,
50 to 100 pound at 1000 feet per minute. Machine includes:
Pressurized Valley Iron Works headbox
65'-7" long x 144" wire, foiled table,
flat boxes, dandy roll, suction couch
knockdown fourdrinier
Dual suction press
Four dryer sections with (44) 48" diameter cans, non code,
anti friction bearings (2) 2 roll calender stacks
Pope reel Electric
drive (2) coater
stations, Black Clawson Fountain Blade coaters
Black Clawson 24P Selectifier screen, Clark & Vecarrio
Deculator cleaners, Measurex
system, pumps, controls, spares, etc. |
| XA098188 |
Used tissue
mill with a capacity of 75 TPD with:stock prep; Beloit tissue machine with
former and inclined fourdrinier 3300 mm at pope reel, new 1965 yankee
cylinder new 1992 and max speed of 1.220 MPM; Accuray system; Jagenberg Vari
Du rewinder with maximum speed of 1.6 MPM and rewind diameter of 1500 mm.
Makes tissue and MG papers 13 - 36 GSM. |
| A097965 |
Used 129
trim paper machine, originally installed in 1896, but with major rebuilds
that leave only some dryer frames from that vintage. Oldest rolls or other
needed components no older than the 1950s, but with major upgrades in 1984
through 1986. Grades were 60-145 pounds per 3300 square feet of coated
paper. Machine speed was 1100 FPM on 60 lb (lineshaft limited) and 550 FPM
of 145 lb (dryer limited). Machine includes the following components.
Headbox Sulzer Escher Wyss step diffuser headbox, 316 s/s. Slice width 139
(3530.6 mm) Design speed 1080 FPM initial, but capable of 2000 MPM. Basis
weight range 70-120 lb. PE tank flow range 3835-2980 GPM with future of 7150
GPM. New 1984. Fourdrinier L.G. Industries, 316 s/s, cantilevered, with 3
vacuum boxes, 4 flat vacuum baxes and 10 foils (1-forming board, 4-with 4
strips, 3-with 3 strips, and 2-with 2 strips.) 12 uhle boxes. 28 diameter
Dandy roll and 26 diameter suction couch roll with hard rubber over bronze.
New 1984. Presses
1st press with micro rock top roll (spare roll is granite) and 26 suction
bottom roll with 150 pli. 2nd press with granite top roll and blind drilled
L&G bottom roll with 200 pli. 3rd press is a smoothing press with micro rock
bottom and polly top roll, pneumatically loaded (60 psi). 150 pli. Dryers
Most dryers are non code. However, the following is a description of whats
there. 1st dryer section includes 26 dryers, 48 diameter. The Beloit felt
rolls were added in 1995. False ceiling in hood with exhaust dampers. Pocket
ventilation nozzles and ducts were new in 1995. 2nd dryer section is after
the size press. Includes 11 dryers nade by Beloit and Sandy Hill. As above,
less the Accuray. 3rd dryer section has 11 cans by Beloit and Sandy Hill.
Beloit felt roll (1993) open canopy hood, rope stretch. No drive. Code
dryers are: 3) Sandy Hill cans 48 dia. X 136 stamped for 50 psi; 1) Sandy
Hill can, 48 dia. X 136 stamped for 75 psi; 3) Sandy Hill can, 48 dia. X
136 stamped for 125 psi; 1) Beloit can, 48 dia. X 132 stammped for 50 psi;
and 3) Beloit can, 48 dia. X 132 stamped for 75 psi. Cans were new between
1978 1998. Size Press Patton, horizontal size press with line shaft drive,
cone pulleys and transfer box. Calender 136 face 128 web Appleton single
nip machine calender. 1500 FPM maximum design speed. 1000 pli design nip
pressure. Includes bottom swimming roll, 19 dia. Non-driven. Temperature
controlled driven roll, 28 dia. AMCO thermal system and pneumatic pressure
system. New mid 80s. Coater AB&V bill blade coater with nozzles and backing
roll was new in 1985. With 2 after coater chilled rolls, C frame and
tanks. Reel Jagenberg horizontal track reel new in 1984. 128 working width,
86.5 maximum reel diameter. 360 MPM maximum speed. Auxiliary Equipment 72
DSM screen. Controls, drawings and manuals.
|
| H095331 |
Used Allimand fourdinier
paper machine, trim with 3,400 mm (134") maximum speed 300 mpm
(984'). Machine
includes: Fourdrinier 2.5 meter (98") dia. yankee creping
(drying) cylinder 8
after dryers 1500 mm (59") after dryers
Pope reel Winder
Controls and spare parts also included
Voith yankee dryer 5,000 mm (196.9") dia. 54.5 atmospheres
(67.5 psi) manufactured in
1971, reconditioned and not used since.
Stock preparation equipment including but not limited to refiners,
jordons, screens, pulpers, pumps, etc. |
| H096210 |
Used paper machine with a
trimmed width of 3500 mm. Production
approximately 62000 TPY of 60 to 80 GSM paper at 600 MPM.
Wire width is 3962 mm. Machine
consists of: - Beloit 3 roll
headbox, 3962 mm wide, with Termatrol slice control - Beloit wire, 3962 mm
wide x 39,140 mm long - 610 mm dia. breast roll - Foils and suction boxes
- Suction couch roll, 762 mm dia. - 3 press sections (1st press is 44.5 Dn/cm,
2nd & 3rd presses 62.5 Dn/cm - 47 dryer cans, all 1522 mm dia.
Mfg. by Walmsley - (2) coaters, 650 mpm (good for 800 mpm), both 8
gsm - Beloit pope reel, 914 mm dia. drum (max. dia. of reel is 2286 mm) -
(2) Eck & Sohne 12 roll supercalenders, 3800 mm face width, 3600 mm
working width, 850 mpm, with rewinding system - Beloit single drum
rewinder, 3900 mm drum width, 3600 mm trim width, 2000 mpm. - Beloit
slitter rewinder, 3810 ,, face width of drum, 2000 mm unw/1520 mm rew,
2300 mpm - Broke pulper - Coating plant with (2) s/s vats, pumps, (4)
Celco filters, & Valmet filtration plant |
| H094055 |
Used Beloit 143"
trim paper machine previously produced 100 TPD of coated magazine grades,
40 to 120 pound at 800 feet per minute. Machine includes: Pressurized Valley Iron Works headbox
69'-11" long x 156" wire, driven dandy roll, suction
couch with steam shower knockdown fourdrinier
Dual suction press
Dryer section, (27) 48" diameter cans, non code, (2) 12'
Yankee dryer cans, 30 psi
non code, sleeve bearings
(2) 2 roll calender stacks
Horizontal track reel
Steam turbine, line shaft drive arrangement
(2) coating stations, (flooded nip)
Black Clawson 24P Selectifier screen, Clark & Vecarrio
Deculator cleaners, Measurex
system, pumps, controls, spares, etc. |
| A097651 |
Used 144" (3.66M) trim
Rice Barton fourdrinier paper machine last producing 5.6 - 7 TPH on 22-48#
publication paper at 2000 FPM. Machine includes: 160" wire width Rice Barton
fourdrinier with 32" couch roll; Beloit first press 450 pli; Beloit second
press 400 pli; (38) Rice Barton dryers 60" diameter with anti friction
bearings gear drives with 140 teeth and pinions with 63 teeth; 10 roll
calender stack with 30" bottom driven roll, 16" queen roll; Black Clawson
36" diameter reel with mount hope roll; Black Clawson winder; drives
Measurex 2090 scanner system; IMPCO disc saveall; cleaners and refiners. |
| A097652 |
Used 144" (3.66M) trim
Rice Barton fourdrinier paper machine last producing 5.6 - 7 TPH on 22-48#
publication paper at 2000 FPM. Machine includes: 160" wire width Rice Barton
fourdrinier with 32" couch roll; Beloit first press 450 pli; Beloit second
press 400 pli; (40) Rice Barton dryers 60" diameter with anti friction
bearings gear drives with 124 teeth and pinions with 56 teeth; 10 roll
calender stack with 30" bottom driven roll, 16" queen roll; Black Clawson
36" diameter reel with mount hope roll; Black Clawson winder; drives
Measurex 2090 scanner system; IMPCO disc saveall; cleaners and refiners. |
| A098114 |
Used 3700 mm
(146) trim MG paper machine line, last producing 3.8 TPH of 40 180 gsm
envelope and bag papers at 150 400 MPM. Line includes stock preparation
including cleaners, screens, separator, thickeners, claflin and refiner.
Machine includes: Voith pressurized flowbox, stainless lined; Bertrams shake
motion, stainless cantilevered wire frame, forming board, foils, suction
boxes, suction couch, etc.; first press includes Millspaugh suction roll on
bottom with granite top roll; Second press with micro rock and mate covers;
dryers include (5) Westbury 1500 mm diameter cans, operating at 34 psi, 5000
MM Walmsley MG cylinder with 4140 mm face operating at 55 psi, (3) Westbury
1500 mm after dryers operating at 15.5 psi; Measurex scanner for moisture
and grammage profile; horizontal reel with pneumatic loading; sectional
electric drive; pumps; Passaban two drum rewinder (1995) 3750 mm wide with
shaft unwind; Toledo floor mounted scales with digital read out; Hanley
horizontal baler; and cranes. Specs available upon request. |
| A097843 |
Used 3.9 M
(154") trim Beloit fourdrinier machine previously producing 8000 MTPY of
imitation parchent or 30-90 GSM operating at 250 MPM (Maximum design speed
is 350 MPM). Machine includes: shearflo hydaulic headbox; cantilevered
fourdrinier with 3 Beloit wet presses; 47 dryers 1524 mm diameter; size
press; pope reel; Jagenberg and Belooit rewinders. Stock prep includes
filters, refiners, cleaners, screens and pulper. Specs available upon
request.
 |
| A098229 |
Used 4050 mm
(159") trim Tampella / Beloit paper machine, previously making kraft liner
105 - 230 gsm at 180 - 400 mpm. Includes stock preparation and approach flow
system. Machine includes Tampella 4310 primary headbox; Tampella 4300
secondary headbox; fourdrinier;1st press with bottom suction roll; 2nd press
with blind drilled bottom and top roll blind; 35 pre-dryers, 2.8 bar; 10
post-dryers4 bar and 9 bar; single nip crown controlled calender; Accuray
1190 system; Pope reel; sectional drive; vacuum system; Controls and more.
Full spec sheet with photos available |
| A097921 |
Used 4200 mm
(156") trim, 4700 mm wide Voith paper machine previously producing 30-35 tpd
of wrapping paper, machine glazed papers, 36-90 gsm at 70-300 MPM. Machine
includes: closed headbox; forming board; suction roll; 5000mm diameter
yankee cylinder; pope reel; and winder. Full specs available upon request. |
| A098200 |
Used 4 meter
(157) fourdrinier paper machine last producing 475 TPD coated sheets and
reel papers, 50 100 GSM with a full range of 90 150 GSM at 400 800 MPM.
Machine includes: Beloit BEL-BAIE wire section and former; three presses (65
kn/m, 75 kn/m and 35 kn/m); four 3 bar drying sections, Black Clawson cans;
Voith speedcoater with Honeywell scanner and infra red dryer; fifth dryer
section 3.2 bar; Jagenberg blade coater with gas infrared dryer and air
float dryer with scanner; sixth dryer section; Jagenberg blade coater as
above; seventh dryer section; UMV tandem soft nip calendar; cross machine
scanner; basement; Jagenberg 58-15 Vari Flex 4300 mm winder. |
| A097780 |
Used 164"
Beliot paper machine previously producing 750 tpd of 26 - 40 lb/100 sq. ft.
(127-195 gsm) runing at 1800 to 3200 fpm (549-975 mpm). Machine includes:
Beloit Concept III Converflo headbox; fourfrinier; first press (1988) has a
25" dia. Blind drilled poly covered roll, a 40" dia, 18" Hg Poly covered
center roll (450 pli); second press (1988) has a 38.5", 18" Hg, stainless
steel top roll and 37.5" dia internally loaded exteded nip press CC roll
(500 pli); ENP loading is 6000 pli; 49 dryers 60" dia. x 174" face, 125 psi
@ 450 deg. F. code stamped; and reel. |
| A097809 |
Used 4.250
meter (167") trim fourdrinier paper machine last producing 300 TPD of 90 -
200 GSM at 400 MPM (design speed of 600 MPM). Rebuilt in 1990, machine
includes: pressurized head box Beloit Stataflow twin layers fourdrinier wire
section; dewatering table with ceramic multifoils; four presses include 1)
press suction, 2) press venta-nip 3) press with Beloit cc-roll and 4)
smoothing press; 64 dryers 1500 mm diameter at 5 bar pressure; horizontal
size press; 4 roll machine calender; LIPKE cross profile; pope reel;
Jagenberg 2000 mpm winder and strapping machine for rolls. Stock pre
includes: fractionator; deflaker; refiners; thickeners; screens; and
cleaners. 250 ton per day waste paper plant includes: 3 pulpers;
turboseparators; fiberizer; cleaners; thickeners; hot disperging system; and
more. |
| A098041 |
Used 168"
(4.28M) trim paper machine last producing up to 12 TPH of woodfree paper 80
- 210 gsm with a design speed of 620 mpm. Machine includes 1984 Escher Wyss
step diffuser headbox; knock down fourdrinier; three press sections; 52
dryer cans 1219 mm diameter x 4300 mm face with 3.0 bar maximum pressure;
Black Clawson inclined size press; 1984 4-roll plus Kuster swimming roll
calender; and horizontal reel. Also included is dry end broke pulper;
Measures 2002; Honeywell DCS; other scanners; vacuum pumps and machine
drives. Detailed specs and photos upon request. |
| A098295 |
Used 4300 mm
(169") Fourdrinier paper machine last produced 22000 TPY (for a medium
substance of 60 gsm) of 50-120GSM at 305 MPM. Machine includes: headbox;
fourdrinierwith dandy roll; Black Clawson presses; 38 dryers in 4 sections
1524 mm ; size press; 2 nip calender; and pope reel. Also includes heat
recovery plant, etc. |
| A097860 |
Used KMW 4320
mm (170") trim MG machine to produce 8,000 mtpy of 35-120 gsm Sulphate,
sulphite wrapping paper and bag paper at 90 mpm. Machine includes steel
headbox; fourdrinier; suction press and stone press; glazed rubber presses;
4150 mm diameter Yankee (300 kPa); Brunnschweiler dryer hood; pope reel and
drive. |
| A097671 |
Used KMW 4500
mm (177") trim paper machine previously used to make 6-8 TPH of white and
brown sack kraft paper, 70-170 gsm at 300-380 MPM. Machine includes: KMW/Valmet
type headbox 5180 mm slice; Svenska Flakt fan dryer system; calender; reel;
winder; broke pulper. 500 volt, 400 kPa electric supply. |
| A098249 |
4350 mm
(171) paper machine for writing-printing paper (35 - 150 g/m2) - telephone
directory - newsprint - LWC, etc. Stopped summer 2006. Wire width: 4850 mm,
Reel width: 4350 mm, Basis weight: 35 - 150 g/m2, Max speed: 1000
m/min.Capacity: 300 Tpd. Machine includes: Fourdrinier with top former,
forming board, 21 adjustable angle foils 4 suction boxes; Press Section:
Twinver plus third press, Presses face: 4930 mm, Center bearings distance:
4510 mm; Pre-dryers section with 40 dryer cylinders Ψ 1522 mm, 2 Unorun (6 +
8) and 2 double felted (14 + 12), working pressure 5 bar; Top technology
Metso Optiziser size press, rolls Ψ 714 mm, with 3 spare rolls; I.R.
Solaronics gas dryers; Post-dryer section with 5 dryer cylinders, working
pressure 5 bar; Single nip machine calendar, with spare rolls;
Brunnschweiler hood with heat recovery; DC Valmet sectional drive; left
hand; QCS by ABB. Machine built by Beloit in 1961; major upgradings: headbox
by Valmet in 1987 (Sym Flow with profile control); pondside: 4680 mm; top
former by Valmet in 1987; size press by Valmet in 1999 (Sym Sizer); post
dryer section by Comecart in 1999 (5 dryers Ψ 1500 mm); reel by Valmet in
1997. |
| A098227 |
Used 180
paper machine built by Beloit and Voith to produce up to 350 TPD of Coated
Freesheet (28 60 #/3300 sq. ft.) and Lightweight Uncoated Freesheet (27
60 #/3300 sq. ft.). Working speed 3343 FPM (maximum speed 3500 FPM). New
1968 with major rebuilds in 1995 and 1999. |
| A098152 |
Used 180
(4.6m) trim top former paper machine, last producing 350 FPM. Machine
includes: Voith hydraulic dilution headbox; Voith top former; press section;
34 main dryers 60 diameter, 75 PSI; pre-calender Beloit 2 roll with
controlled crown bottom roll; 11 after dryers; infrared dryers; Sulzer soft
nip calender; Beloit reel; controls; spares; stock preparation equipment;
and finishing. Full list available. |
| XAA098243 |
Used 4600mm
(181) fourdrinier paper machine producing 87,473 TPY,, speed 480 to 760
m/min, capable of 830 m/min, gsm range 35 to 90. Production 10 to 12 t/hr at
a speed range 400 to 750 m/min, producing an average grammage range of 42 to
79 gsm eg. at 54 gsm, production is 11.7 t/hr. The paper machine is of
basement design and the drive is on the left side looking from the flowbox.
Manufactured in Japan by SANP in 1969 with rebuilds in 1997. Machine
includes: Beloit Concept 4 flowbox; cantilever, stainless steel fourdrinier
with suction couch; (2 presses; 36 pre-dryers 60 psi; 27 1524 mm diameter
dryers 60 psi; Honeywell Measurex scanner; basement pulper; Beloit size
press; (9) after dryers 1524 mm diameter 60 psi; under machine Sydrapulper;
twin Beloit 2 roll calender; Honeywell Measurex scanner; hole detector;
Valmet horizontal drum reel; DC drive; vacuum pumps and a Jagenberg
rewinder. Also includes full stock preparation. See Full Equipment list. |
| A098253 |
Used 4.8
meter (188") trim printing and writing fourdrinier machine to produce 350
tpd of 12-28 lb/1,33 sq. ft. running 800 mpm. Also ran copy paper and
quantum opaque. Machine includes Escher Wyss step diffuser headbox;
foudrinier with Wscher Wyss Twinformer Top-wire unit; Beloit press sections
(3); (39) main dryers 1500 mm dia.; Gate roll size press; (8) after dryers
as above; 2 roll Beloiit calender; Beloit Level Rail reel; Beloit Model L
winder; and Controls with Honeywell process control computer system. |
| A098259 |
Used 5.25
meter (207) trim, twin wire machine producing printing and writing, 55-65
gsm, 350 TPD of improved newsprint 52 gsm, and 400 TPD of book paper 80 gsm.
Machine ran at 850 MPM (2789 FPM). Machine includes: Headbox (Voith WH
7500-ModuleJet with full dilution control 86 x 64.8 centers; 5580 pond
width; maximum speed design 1200 m/min, new in 1996); Ahlstrom single fan
pump, Ahlsrom H4 Moduscreen and Voith cleaners; fourdrinier with 5700 mm
width,suction couch; Black Clawson Top Flyte top former; Press section (Tre
Strate Nips; suction pick-up & 1st press with bottom suction roll, single
felt, 2nd & 3rd press bottom felted no suction, PLI given 50, 80, 100kN/m);
Dryers ((57) Voith drying cylinders, 60" diameter, rated for 2.5 bar
operating pressure , enclosed gear train, 6-drive sections, 4 steam
sections, central auto lube & vibration systems); Soft calender (Voith
Ecosoft 2 x 2 with (2) Nipcorect rolls, (2) heated Thermo rolls, and (2)
Voith water jet edge trim systems, new in 1999); Pope reel (Voith new in
1999, with reel storage & 8 reels, fully automatic, jumbo reels 2.5m
diameter, and Metso reel transfer by hoist & power rail bogey); Winder
(Metso "Winbelt"; 2.5 m diameter reels in, and 1.5m diameter max rolls out
16 slitters for A4 paper width auto load cores); QCS (ABB AC450 new in 1999
with online colour & ash (Moisture, gsm, caliper); DCS (Siemens S5 new in 96
but unsupported). Electric is 50 Hz. Drives are Dry end- Siemens AC VFD new
in 1999; dryers & wet end is Asea DC. Includes all stock prep, (3) overhead
cranes, PM clothing and all PM spares. Many photos and drawings are
available. |
| A098300 |
Used 5300 mm
(208") trim Beloit fourdrinier newsprint machine last producing 350 TPD, 45
GSM at 915 MPM of newsprint and directoery paper. Machine includes:Beloit
Converflow headbox; fourdrinier; 3 presses;54 dryers 1522 mm dia x 5 bar; 6
roll machine calender; pope reel; and 2 Beloit rewinders. Machine is left
hand driven by a line shaft equipped with big special gearboxes for each
drive point. Stock prep. |
| A098255 |
Used 5.3M
(208") trim twin wire paper machine last making 110,000 TPY book paper at
850 MPM. Twin wire rebuilt in 1998 with Voith headbox, Black Clawson Top
Flyte former, soft calender, 50 cycle electrical, DC variable speed drive,
Metso Winbelt winder. Can also make newsprint, stationary and laser paper. |
| A098299 |
Used 6100 mm
(240") trim newsprint machine capable of producing up to 400 TPD 34-70 GSM
at 915 MPM newsprint,telephone directory, wood free and wood containing
printing and supercalendered paper. Machine includes: pressurized headbox;
fourdrinier; pick-up suction roll; 3 presses; 56 dryers 1522 mm dia x 5 bar;
6 roll calender; pope reel; and 2 rewinders. Also stock prep.Used 6100 mm
(240") trim newsprint machine capable of producing up to 400 TPD 34-70 GSM
at 915 MPM newsprint,telephone directory, wood free and wood containing
printing and supercalendered paper. Machine includes: pressurized headbox;
fourdrinier; pick-up suction roll; 3 presses; 56 dryers 1522 mm dia x 5 bar;
6 roll calender; pope reel; and 2 rewinders. Also stock prep. |
| A098309 |
Used 7000
mm (275) trim newsprint paper machine last producing 402 TPD 42 48 GSM at
900 MPM. Machine includes Valmet Symflow headbox, Valmet top former, Valmet
flowbox with dilution control, auto profile setting on slice, stainless
steel wire frame, cantilevered design, four stainless foil units, Valmet top
former, suction couch roll. Dryness after the wire: 20%.; Suction pick up
from wire, combi type press with two rolls running against a central roll,
plain press rolls, second press with bottom kuster roll. Cantilevered
design, 43 dryers on A/F bearings and rated 70 PSI operating pressure,
dryers 48 diameter with bolted ends recently rejointed on A/F bearings and
rated 50 PSI operating pressure, enclosed gear drive, internal siphons,
sheathen rope feed, manual felt tensioning. Fully enclosed hood with front
opening doors. Under machine pulper at the last dryer, Two roll calender
with bottom Kuster roll, Fibron tail feed from dryers through calender to
reel up, Measurex cross machine profile, MX 2000 with Divici upgrade,
measuring gsm, moisture etc. Ulma hole detector, Calcoil on calender roll.
Broke pulpers at press section and last dryer. In the basement is a
SAFEMATIC auto lub system to all dryer, calendar and reel up bearings:
Rewinder Jagenberg Vari Dur Drive L/H, brake generator for reel spools, 11
slitters, tambour unwind with lateral movement, tail feed, 7000mm deckle in
and 6850mm out, unwind diameter 1500mm , rewind diameter 1250mm on newsprint
and 1500mm on other grades, air box assisted, shaftless rewind reel ejector
and lowering table. Twin motor drive each 116 kw and rewinder model is
85-15/850/7400mm, year 1982. Core feed manual from the side of the rewinder.
Also included are refiners, Beloit and Jylhavara pressure screens, drum
thickener, several pulpers, and vacuum system. |
| A098310 |
Used 7000
mm (275) trim newsprint last producing 402 TPD of 42 48 GSM at 900 MPM.
Approach flow includes Ahlstrom Moduscreen in stainless, model HB6, year
1998, number 711. Secondary screen: Ahlstrom Moduscreen model HB2 CP screen.
Jylhavara pressure screen JS-140-LO2M, 1985.Two drum thickeners for white
water recovery, stainless wire covered drums.Voith final stage LD cleaners
not in use. Machine chests are of concrete construction. Stock pumps are
Scann.In machine basement air receiver AR22 with a SWP of 105 psi. Beloit
Concept 4 headbox, Beloit flowbox with dilution control, step diffuser
manifold, manual slice adjustment, stainless steel, wire frame stainless
with plain breast roll, three stainless foil units and vacuformer before the
Beloit Bell bond top former, suction couch roll, stainless steel wire frame
with cantilever operation. Dryness after wire: 20%, Suction pick up from
wire, first press with pneumatic loading, and second press with a bottom
kuster roll. Press section cantilevered for easy felt changes. First press
450 PLI, under machine pulper between press section and dryers. Dryness
after press section: 40%.43 dryers 48 diameter with bolted ends, ends
recently rejointed, on A/F bearings and rated 50 PSI operating pressure,
internal scoops for condensate, enclosed gear drives, under machine pulper,
dryer sheathen rope feed. Auto tension on rope system, manual tension on
felts. Tail transfer from dryers to calendar by Voith tail transfer system.
The dryers have a fully enclosed hood with front lifting doors. Two roll
calender with bottom Kuster roll, through calender to reel up, Measurex
cross machine profile, gsm, moisture etc. Ulma hole detector, VIB damper and
Calcoil on the calender rolls. In basement SAFEMATIC auto lub system to all
dryer, calender and reel up bearings. Reel stand for reel spools containing
a total of 8 reel shells. Jagenberg rewinder model 85-15/850/7400, R/H drive
with a brake generator for reel spool unwind, 7000mm deckle in and 6850mm
out, unwind diameter 1500mm, rewind shaftless for 1143mm diameter on
newsprint and 1524 mm on other grades, tension control, edge adjustment on
unwind stands, 11 slitters, tail feed, shaftless rewind reel ejector and
lowering table. Twin motor drive, model 180 kw each motor. Core feed manual
from side of the rewinder. |
|
