| A097543 |
Used Signode
band-machine, installed in 1990. Modell PSM-M20-RMF, drawing no.X1-45565,
380 V - 3 fase - 50 Hz and 24 V. Steel band Apex CE 9,5 x0,38 mm / 38 MNA.
Free opening ø 1.850 mm, previous rolls: max ø 1.800 mm, min ø 600 mm.
 |
|
A098278 |
Used Black Clawson roll
splitter to handle rolls 72" diameter x 84" face. With hydraulic power pack. |
|
A098279 |
Used AB Kollin & Strom
roll splitter to handle 60" diameter x 110" face rolls. With hydraulics. |
| A097483 |
Used line to make coated and/or laminated paper, 32,000 tpy of 85-285 gsm from a KMW paper machine; Bruderhaus pre-reeler; Off machine coater with Eck unwind, 2 BTG blade coaters, IR dryers, air dryers, cylinder dryers and rewind; 12 roll Eck super calender, 600 mpm; Quattrol laminating machine, 300-600 gsm, 10-15 gsm glue weight, 350 mpm (new 2000) with 2 unwinds with flying splice, coating station, glue applicator, laminator drying cylinders, cooling roll unit, Lippke QCS and rewind; and 2 rewinders. Please contact Acme for full details. |
| A097912 |
Used and rebuilt Sunds
model PA 1000, 1000 ton bale press. Table size is 1100 x 1200 mm (43.3" x
47"). Clear height maximum is 1300 mm (51"). Maximum clear width is 1100 mm.
Table movement maximum is 1050 mm (41.3"). This press includes: 16 pcs
Geider steering in teflon (upgrading from the older system that is grease
lubricated) ; Out and in belt conveyor in plastic (the older model was made
of steel; Repacking of all master cylinders and pull-back ; Overhaul of all
filling ; Total overhaul of control circuit ; Cleaning, control, test
pressure of oil ; Rebuilding to more modern air filter ; The press is
painted according to the client's ; Examination alt. change of all
manometers ; Delivery time 6-8 weeks after order ; and Free right to
inspection during overhaul work. |
| A097956 |
Hayssen 3600 Tray-Case
cartoner packages wrapped reams of paper; it does this by automatically
performing the following functions: 1) It accepts the reams on an infeed
conveyor; 2) Stacks and counts the number of reams in the stack; 3) Forms a
Tray-Case corrugated blank around the stacks; and 4) Glues, shapes and
discharges the Tray-Case onto a conveyor for labeling and lidding. Date of
manufacture is 1979. Rated for seven trays per minute. Both dual and single
stack capable. Purchased used and placed in service in 1997. Decommissioned
in 2002.
 |
| XA098182 |
Used Cellier coating
kitchen designed for 3 coating heads. Maximum production is 60 MTPD.
Includes: central control desk; protein binders cooker; starch cooker;
dilutor; stainless storage tanks. |
| A097415 |
Manufacturer: J.M. Voith; Manufacturing year: 1975; Type: Used Flotation de-inking line. Volume: 5 m3 / each cell. (net volume) Capacity: Ca. 50 tpd. (approx.5 tpd/each cell.Max.75 tpd.; Pulp consistency: 0,8 – 1,2 % atro. Cells available: 12 nos. (2 secondary and 10 primary cells.), Weight of each cell: 2800 kg (Filled 8000 kg.). Material: Cells acid proof lined, flotation pumps of mainly acid proof material. Power need each cell: 11 kw. (Motor 15 kw,1460/480rpm.V-belt drive); Paddle drive motor: 1,1 kw. Paddle speed 19 rpm.(chain drive.) Motors and chains are not included.) . Shower water amount: 20 l/min./cell; Shower water pressure: 4 bar. Reject pump: Ca. 4000 l/min, Motor 18 kw.. Shower water pump: 300 l/min. 85 m. lift height. Motor 4,5kw.All pump motors are 500 V. . Cell overall size: 3.100 x 2.100 x 2.400 mm. (LxWxH). Material: The cells are lined inside with SS-plates
 |
| A098032 |
Used Beloit model 2810
disperser, 316 s/s with 600 HP, 900 RPM moter. 180 ODMTPD |
| A097822 |
Ronningen-Petter
Multiplex Filter new in 1996. Model SS-A-208-MX-Auto Internal Backwash unit
800 gpm capacity, ss 316 body, 8 tubular filter elements valved in parallel
on common inlet, outlet and drain headers. Filter Element type 7BCF ss
slotted screen 150 microns DeltaGuard auto backwash cleaning system
consisting of differential pressure switch to initiate cleaning cycle.
 |
| H093966 |
Used 176 cu. ft. (5000l).
Voith Morden flotation cell, previous use was waste paper deinking
at approx. 5 tpd per primary cell carbon steel.
With agitator less drive motor (15 hp required per cell). Overall
dimensions 9' 10" long, 6' 7" wide, 7' 5" high.
Price per cell. |
| A097165 |
Used 162" (4120 mm)
face Becker, Mount Hope roll, 7-1/8" variable bend. 4840 mm between
bearings; 216.5" (5500 mm) total length;
7-1/8" (181 mm) outside diameter; 2.3" (57 mm) defection;
3281 FPM (1000 M/min) maximum speed; and 3.8 kp/cm at 30 degrees is the
max. sheet tension. Includes V belt pulley, free pulley for rope system,
swivelling bearings and feflon sleeve. Two rolls available. |
| A098221 |
Used tissue mill
previously manufacturing 1000 T/month, 18-30 gsm with a trim of 2650 mm
(104”). Mill includes: Lamort helical pulper with poire; 17 cu mt
conventional pulper; vibrating screen 2 Lamort deinking cells; Krofta SPC24;
1200 mm diameter drum thickner; 2 Beloit Jones 20” DD Series 3000 refiners;
cleaners; Voith vertical screen; Voith Minisorter; pumps; tankage;
compressors; and B&W boiler. The tissue machine was built in 1975 and
rebuilt many times. The machine includes; 3 stage cleaners; Escher Wyss
pressurized headbox; fourdrinier (not cantilevered); foils, vacuufoils,
suction boxes; vacuum pumps; 4.5 meter diameter Yankee dryer with suction
press; 1 nip press, Aerothermic hood; broke pulper; Gorostidi pope reel; and
a Pasaban rewinder. Full specs available. |
| A098186 |
Used paper mill to
produce 27,000 TPY of specialty and writing paper 75 – 500 gsm at 240 mpm.
Mill includes: fourdrinier paper machine; stock preparation equipment;
machine shop; sheeter; compressors; lift trucks; laboratory; pulpers;
rewinders; printing machine; baler; and much more. Please request an
equipment list, photos and flow sheet.
Click for specs and photos |
| XA097590 |
Used approximately 500
TPD pulp dryer line. Includes: 11'6" diameter x 14' face cylinder former.
(2) press sections. (55) 60" diameter x 176" face dryers ASME rated for 125
psi. Secondary Flakt 6-pass air dryer. Lamb Gray Harbor cutter layboy and 2
bale presses. Also includes: Nash CL6002G vacuum pump and motor. Noss
Radiclone cleaner. Noss Radiscreen. |
| A097989 |
Used Voith roll grinder
capable of handling rolls 2000 mm (78.7") diameter x 6,200 mm (244") face.
Analog control system can be updated to digital. Many spares, grindstones,
supports, etc. |
| A097418 |
Used Logdell 24" x 120"
roll grinder, both straight and parabolic capacity. Presently set up dual
wet stones. |
| A098187 |
Used Farrel (Giustina)
Model 42 - 60 roll grinder. 1524 mm (60") maximum grinding diameter; 8331 mm
(328") roll face length; 8960 mm (352") Maximum wheel travel/ and 11525 mm
(453") bed length. |
| A097417 |
Used Farrel roll grinder,
32" x 175", but can do up to 34" x 200" if journals are not too long. This
grinder grinds straight as well as parabolic (crowned) rolls. Grinder is
presently set up for diamond belts, not wet stone grinding ( this is most
common usage when grinding rubber.) This grinder has had many rebuilds
(upgrades) throughout the years. The gears in the headbox (drive gearbox)
are new. The gearbox has been upgraded with a reliance variable speed drive
so you can move the grinding carriage back and forth across the roll at any
speed you desire. The main gearbox motor as well as the grindstone drive
motors have been refurbished. The bed of the grinder has had the ways
scraped and they are in beautiful condition. The drive screw and nut in the
bed are new. This is a twin wheel heavy-duty swingrest grinder. |
| A097056 |
Used Lamb-Grays harbor
roll upender with electric belt drive, hydraulic lift, two short roll
conveyors 24" and 28" wide. Ran 50" diameter rolls, 3700
lbs. |
| A097137 |
Used Sandy Hill 48"
wide Rotoformer. Speed design 50 - 300 fpm. 1000 gpm max. flow to the
headbox. 51.938" inside of headbox. 46" shell I.d. and
48.188" drilled face. |
| H094562 |
Used Valmet trim blower
system with size 45 hp IAP pressure blower, SWSI, arrangement 1, mild
steel. To convey trim from
winder slitters to a dry end pulper.
In addition to the fan, consists of v-belt drive, inlet damper,
inlet & discharge silencers, trim injectors, supply & conveying
ductwork & dissipators. Designed
for liner board, 26#/1000 sq ft, 6500 fpm winder, max trim width 2"
perside (4" total). Distance
to pulper 100 ft. |
| H095905 |
Used Cranston model
Twistlock 900 unitizer type 60 B 024 with hydraulic units, heat exchanger,
controls and static pay-out stand. Late
model, little use. Bale size
2100 MM L x 680 MM W x 810 MM H, 800 KG.
Knot binding head 62A 028 for 3 MM wire; wire drive unit 62B 001;
wire track 62C 013. 2
hydraulic units, pressure 105 bar, motor 11 KW, speed 1500 rpm.
Heat exchanger. |
