| A098176 |
Used Andritz/Dupps model
3616 stainless steel screw press, 36" diameter x 16' long. New in 1998
 |
| A098334 |
Used French Oill Mill
Machine model LP28150, 316 stainless steel screw press, 19.4 to 1 ratio
double reduction drive with enclosed parallel shaft gearbox with integral
thrust bearing. 150 HP, 1750 RPM main drive motor. Designed to dewater up to
250 ODDTPD of recycled sater paaper from 10% inlet and 30% outlet
consistency. Drawings available.
 |
| H093743 |
One (1) used Baker Triple
screw water extractor/thickener. Stainless steel. No gears or motors. S/N
77882. |
| H094948 |
One (1) used Baker Triple
screw water extractor/thickener. Stainless steel. No gears or motors. S/N
77882. |
| A097023 |
Used Beloit Jones
18", model 4526
horizontal screw press. Unit has screens with 1/4" holes on
7/16" spacing, 316 s/s. Jones drive powered by 50 HP motor. Includes
Jones ree-drainer. Drawings and photos available. |
| A097960 |
Beloit Jones model P-325
Pressmaster, complete with vibratory discharge. Unit has all stainless steel
contact parts, pneumatic cone. Offered less drive motor. Unit is 95%
complete although partially disassembled. Offered as is, or reconditioned
back to manufacturers specifications. |
| H095420 |
USed Hooper (Andritz
Sprout Bauer) triple screw inclined screw Hydrainer.
Model P31-0120-1. With
hopper. Requires 7 1/2 hp, 1200 rpm motor. Takes 0.5% - 2.5% in, discharges at 12% - 15%.
Has (3) 9" wide screws. |
| A098360 |
Used HYMAC Thune press,
model SP 45L. Includes drive and motor. (3-available) |
| A097692 |
Used HYMAC Thune model SP
45 L. Stainless steel. New about 1982. With Falk gear box 870 RPM input and
51.3 PRM output.
 |
| H093679 |
One (1) Used Whitefield
Reiss Inclined Screws. Screen Basket Dia: 16 inchs. for stock de-watering.
Complete with Geared motors, headbox manifolds, valves etc. |
| A098358 |
Used and rebuilt Thune
Eureka SP70L screw press, 316L stainless steel construction. 300 TPD at 4-5%
consistency in and 30 - 35% consistency out (depending on the pulp grade).
New in 1982 and factury rebuilt in 2007 - 2007.
Click for full specs |
| A098350 |
Used Hymac Thune model
SP70L screw press, 316 stainless steel. Includes Hydraulic drive motor.
Production capability is approxx 3000 TPD. |
| A098351 |
Used Hymac Thune model
SP70L screw press, 316 stainless steel. Includes standard drive motor.
Production capability is approxx 3000 TPD. |
| A098244 |
Used twin screw press
thickener 600mm (23.5") diameter 4.6m long x 2.8m wide x 1.4 m high. Inlet 5
- 12%. Outlet: 20 - 45%. With 75 kW motor. Capacity 60 - 130 TPD New 2007. |
| H093638 |
Used Rice Barton model
616503-A triple screw extractor. Driven
by three 7 1/2 hp, 1800 rpm motors. Also
available separately is a single screw unit.
With hoppers and piping. Each
screw driven by an individual motor. |
| A097948 |
Used Sprout Bauer, model:
575-18-4 screw press, with Hansen 28/1 ratio gearbox, type: rmf33rnn, 265
hp, 1260/45 rpm, 17 us gallon ep gear oil.
 |
| A097949 |
Used Kamyr-Sudor 50
dewatering press manufactured by Modo-Meeken with a capacity of 100 ADTPD.
Consistency in 10/12%. Consistency out 25-30%. Hole diameter 4.1 and 2.9 mm.
Pulley and belts + gear reducer to a 30 Kw, 50 Hz, 975 rpm motor. Previously
used in high density refining line. |
