| A098055 |
Used 8' diameter x 12'
high Morden Slush Maker pulper, stainless steel with 36" diameter rotor,
pnuematic operated lid and 250 HP, 460 V motor |
| A098053 |
Used 8' diameter Kvaerner
Hymac stainless steel one ton batch pulper Size 8-1B-36, with 150 HP, 1200
RPM motor and belt drive. Also avialable (seperately) is a 58' long pulper
conveyor manufactured by Advanced Dynamics. |
| A097508 |
6' (1.84m) Valmet batch pulper with mid-high consistencies and low consistency rotor. Handles between 50 and 80 tpd and includes a 150 hp v-belt drive. 210 cubic foot volume 12-15% consistency, 316 stainless steel construction. New 1994.
 |
| A097540 |
Unused 10' diameter x 10' high, 316 stainless steel pulper, less rotor and motor manufactored by Reist Welding. Pulper made for customer who shut down and was never installed. Tank volume is 3880 gallons. It requires a 36" vokes type rotor.
 |
| A097934 |
Used 3000 mm (118")
diameter Grubbens pulper, type 12 SR, continuous, stainless steel
construction, 3200 mm high. Overhauled. No motor |
| A098054 |
Used 10' diameter clover
leaf, model 248 stainless steel pulper, with 48" diameter stainless steel
segmented rotor and extraction plate. Includes 100 HP motor and Faulk
gearbox. Pulper is rated for 36 ODTPD at 6% consistency. |
| H096121 |
Used 10' diameter Beloit
Shark pulper with standard rotor,
gear drive and 100 HP Allis Chalmers motor. |
| H092542 |
Used 10' diameter Black
Clawson cast iron Hydrapulper with standard 54" diameter rotor, #1
drive and 100 HP Westinghouse motor. |
| H096642 |
Used 10' diameter Black
Clawson pulper. 316 stainless steel tank. 150 HP 900 RPM/550v motor with
spare motor. 54" rotor and 1/2" dia. holes on the extraction
plate |
| A097193 |
Used 10' diameter, 12
cubic meter Black Clawson high consistency (10-12%) 304 stainless steel
pulper with 1270 mm diameter three spiral impeller, 1422 mm high. 120 TPD.
132 kW with belt drive.

|
| A097506 |
Used Voith Morden 11 ft diameter pulper. Stainless steel. 5' w x 12' l. Rubber belt bale infeed conveyor. Approximately 36" diameter rotor. Slide extraction 250 hp. 3/60/515v. 1788 rpm belt drive with controls. |
| A096820 |
Used
3800 mm diameter model T4V NOVAT EEY batch pulper, 30 cubic meters,
with stainless steel shell and rotor. 400 diameter extraction
valve. V-belt drive without motor. Includes conveying system for in-feed
including: unload device conveyor; pneumatical claw for bale distribution;
conveyor for unstrapping of bales; lifting conveyor; frame work; and couplings for
motor-reducers. |
| A097933 |
Used 12' diameter batch
hydrapulper, 8' deep with 60" diameter standard rotor. Steel. Low
consistency. |
| A097185 |
Used 12' diameter Black
Clawson HCV Hydrapulper, fabricated stainless steel tub with 3/8"
diameter holes in the extraction plate and
42" Vokes rotor driven by a V-belt drive and a 150 HP motor.
Spare rotor and extraction plate.

|
| A097829 |
Used 3950 mm (13')
diameter, 32 cubic meter working volume model JP-32 Jylhavaara (Metso)
pulper, 316 stainless steel. Includes 132 kW motor. Technical data and
photos available.
|
| H094071 |
Used 14' Black Clawson
Hydrapulper with #3 drive and 250 hp motor, 980 RPM, 3300 volt(slip-ring
motor). Stainless steel
construction. Conventional
Vokes rotor. 3/4" dia holes on the extraction plate. One spare plate with 1/4" dia holes.

|
| A097945 |
Used 15' Beloit Jones
3140B Shark Barracuda Stainless Steel pulper. Mfg 1986. Batch style pulper.
304 S/S. Barracuda pulping rotor. Beloit 600V gear drive. 4.55 to 1 Ratio.
S/N BC-958. Recently out of service due to complete plant shut down. Unit
reported in good overall condition. Additional specifications and manuals
available. |
| A097947 |
Used 16', 1800 cubic
foot, 400 TPD Hymac Turboflex 16-3B-56 stainless steel pulper with 400 HP,
2300 Volt motor, spare rotating assembly and new perforated plate. |
| A097952 |
Used 17'-7" diameter
Morden Sluch-Maker continuous pulper, previously producing 150 TPD, 316
stainless steel construction, 17' -5" high tank with 43-H112 (43" diameter)
impellar and .75" extraction holes, drive and spare drive. Was orriginally a
batch pulper, but was converted to continuous operation. |
| A098073 |
UsedHigh Density,
Fiberprep Helico Pulper capacity: 60m3 (197 Ft3) Dimension: 211" dia (5359
mm) X 144" high (3658mm), 24" outlet pulp, Rotor High: 86.'6" (2200mm),
reducer: Falk, model 527ZB X 25, Motor: 1250 Hp, 1160 Rpm, 2300V. Weight:
pulper: 30 000 lbs, rotor: 9 925 lbs, gear unit: 9 500 lbs Material: SS316L.
With feed system to receive recycled paper bales from a lift truck. Maximum
bales size: 50" wide X 80" long X 52" high, 2700 lbs. Feed capacity: 20/30
bales/hour, 425 ad/day, cycle time : 1 min. max. Includes: infeed conveyor -
24.16' long X 72" width; discharge conveyor - 72" long X 72" width; weigh
conveyor- 50' flat on 1st section, 18' with 25° inclinaison up feed and 8'
flat conveyor and a load leveller system.
 |
| H092923 |
Used 18' 6" diameter
Voith Morden Brute pulper. Model 43HAGV. Stainless steel construction.
Continuous extraction. 6% consistency. 400 HP, 2300 volt motor with direct
drive. |
| A097749 |
Used Black Clawson 20 ft.
Diameter Hydrapulper. Cast iron. 96" conventional rotor. #3 drive. 500 hp
motor. With 42" Widex 60 ft. long bale infeed conveyor and bale lowering
table. Controls. Discharge pump and motor. |
| A097098 |
Used horizontal pulper,
Grubbens L 25 R. Low built
type, the impeller is conventional grubbens type, manufacturing year 1986,
stainless steel standard, volume 25 m3, 3 - 5% consistency (depending of
material), plate perforation dia is 25 mm. The pulper is in line with
a winder (not included) and is connected to the winder main beams with a
stainless funnel, with approx 4.8m. V-Rope drive AC motor 160 Kw, 980
rpm, 380 v, 50 Hz. Capacity 20 tph at consistency 91/3%. Rotor speed 365
rpm. Rotor od 820 mm. |
| A097313 |
Used 6 meter Escher Wyss
high consistency pulper, 2750 mm (108") diameter tank, stainless
steel construction. Extraction plate with 20 mm holes. Batch design. 175
HP two speed motor. New 1992. With 15 cubic meter dilution tank and 20
meter long belt conveyor, 1100 mm wide.

|
| A098069 |
Used Lamort model II
Scavanger. No motor
 |
| A098068 |
Used and rebuilt Lamort
model II Scavanger with new rotor and ring. No motor
 |
| A098061 |
Used Voith Pump
Contaminex size 10/11, stainless steel, refurbished to new standard with 55
KW motor. |
| A097954 |
Used Voith Pump
Contaminex size 10, stainless steel, refurbished to new standard with new
bearings and sleeve. |
| A097981 |
Used Voith Size 20
Contaminex with double acting LOHSE valve NP 300. |
| A098047 |
Used Filtres Philippe
304L trommel screen, 1500 mm x 2400 mm x 500 microns. Variable speed gear
motor. New 1992. |
| A097955 |
Used and refurbished
Voith Pulper Reject Trommel, 1200 mm diameter x 1700 mm long with 10 mm
perforations. New 1985. Pulper production 200 TPD. |
| H094195 |
Used Jones hi-low pulper
#6, 50 cu. Meter, 350 tpd, stainless steel construction with motors and
conveyors for pulp bales. |
| A098062 |
Used Voith pulper reject
trommel 1000 mm diameter x 2000 mm long with 10 mm holes. 150 TPD
production. Offered as is or reconditioned to new specs. |
| A097058 |
Used 16 cubic meter
Beloit stainless steel HILO type pulper with; low speed shaft and pulley;
high speed rotor with bearing and 700mm diameter screen; (2) 81 kW
motors; pneumatic discharge; and spare parts. |
| A097069 |
Used 16,000 liter, 90 tpd
Beloit HILO stainless steel pulper. Has low speed shaft and pulley,
6-throat diameter 1600, high speed, 700mm screen. Motors are 81kW. Spares |