| A097538 |
Used Sheet cutter and ream wrapper manufactured by Schneider / Hayssen / Titan / Domino for a DIN A4 line. 1550 mm wide, 800 kg/h. Schneider discharger (1999) transports the big sizes ream by ream to the cutter, also Schneider (1985) 1550 mm. Hayssen packing unit (1978) packs the 500 sheets with wrapping paper. Titan wrapping unit (1986) wraps the cartons with the DIN A-4 packages. A lifting table is hydraulic and loweed in the floor for ergonomic piling of the cartons on the pallets. A Domino printer for individual labelling of the reams. Some spares. Photos available. |
| A097538 |
Used Sheet cutter and ream wrapper manufactured by Schneider / Hayssen / Titan / Domino for a DIN A4 line. 1550 mm wide, 800 kg/h. Schneider discharger (1999) transports the big sizes ream by ream to the cutter, also Schneider (1985) 1550 mm. Hayssen packing unit (1978) packs the 500 sheets with wrapping paper. Titan wrapping unit (1986) wraps the cartons with the DIN A-4 packages. A lifting table is hydraulic and loweed in the floor for ergonomic piling of the cartons on the pallets. A Domino printer for individual labelling of the reams. Some spares. Photos available. |
| A097959 |
1979 Pemco
Model 35-OH Ream Wrapper, 8 x 10" x 1" minimum w/OEM option 6 x 8" x 3/4" 9
x 14" x 5" maximum Heat Seal. 60 maximum cycles. Machine in good condition,
idled approximately 3 years. Ran 8.5 x 11 and 14" product. The 11" was
produced at 43 cycles per minute.
 |
| A097229 |
Used 1250mm trim Lamb
folio ream wrapper capable of 8 reams per minute. Ream length 594mm to
1220mm; ream width 420mm to 860mm; and height 25mm to 70mm. 2 unwind
wrappings with a maaximum 700mm diameter. Equiped with 2 palett infeed
conveyors; ream discharge; 2 Nordson hot melt glueing systems; and 2
paletizer for one or two ream stacks. Reported in good operating
condition. Will be stopped summer of 2001. |
| A098070 |
Used Lamb
wrapping machine. 210 x 297 mm minimum ream size. 1200 x 1520 mm maximum
ream size. 200 mm maximum height. Produces 8 reams/minute. New in 1990.
 |
| A097073 |
Used Rauma-Repola (licence
by Lamb) reel wrapping line with a capacity of 2000 reels/24 hours. Reel
width 400 mm minimum and 2700 mm maximum, diameter is 600 mm minimum and
1500 mm maximum. 8-rell wrapping paper staions. New 1971 with rebuilds in
1991. Spares. |
| A098247 |
Used Lamb
Gray Harbor Pulp roll finishing line, 40" - 60" diameter x 24" - 56" long
rolls, 96 per hour. Includes: winder roll outfeed conveyor; roll turntable
and stops; roll wrapping line kicker; roll wrapping machine with hydraulic
power pack; roll kicker and upender with hydraulic power pack; roll weighing
station; and various short roll conveyors. |
| A097200 |
Used 92" wide
William & Wilson roll wrap system with dual drum pit mounted rewind
station with roll ejector and crimper station. Overhead roll wrap product
station with (4) unwind shafts and saddles. No header press.
|
| A097899 |
Used roll wrapping UMV
1989s, 40 rolls per hour, maximum diameter of the roll is 1300 mm (51") and
roll widths between 500 - 2000 mm (20 - 79"). Previously wrapping corrugated
board and PE film.
 |
| A097885 |
Used Lamb roll wrapping
line built in 1990 to handle 30 rolls per hour 280 - 2100 mm (10 - 83") wide
x 600 - 1250 mm (24 - 49") diameter and up to 2500 kg (5500 lbs) in weight.
There are 6 back stands for kraft paper. System includes: belt conveyors;
hydraulic roll pushers; roll stopper; centering device; paper in-feed
wrapper with gluing station; crimping unit; end press; crane for wrapping
paper loading; and electrical cabinets and controls. |
| A098127 |
Used Thune
roll wrapping system, 60 rolls per hour, 1440 rolls per day. 500 – 2800 mm
roll widths; 600 – 1500 mm roll diameters 4200 mm maximum roll weight. New
1974 and rebuilt by Valmet in 1995. |
| A097957 |
Conflex
Shrink Wrapper, model CW-160. Manufactured in 1993. Has tooling for 8.5 x 11
or 14" product. Automatic infeed rated for 60 cycles per
minute.Decommissioned ~1999.
 |
