| A097686 |
Used Ahlstrom Model 200
Centrisorter screen, LR rotor, stainless steel. With 75 HP, 1775 RPM, 460
volt motor. New 1990.
 |
| H092496 |
Used Ahlstrom model 400
Centrisorter, 316 stainless
steel (sis 2343) with 1.8 mm holes. 75 kw, 380 volt motor with belt drive.
150-200 tpd |
| H094755 |
Used Ahlstrom model 400
Centrisorter, 316 stainless
steel (sis 2343) with 1.8 mm holes. 75 kw, 380 volt motor with belt drive.
150-200 tpd |
| A098260 |
Used Ahlstrom (Andritz)
Model F2 Moduscreen with .006" slotted screens and 125 HP motor. 316 s/s
 |
| A097315 |
Used Albany AES model
4005 white water stainer/filter, 5' diameter tank with 100 mesh polyester
screen over 10 mesh stainless steel, 2" shower inlet (shower is on
top)). 300 psi pressure
rating; 31 gpm flow. 316 stainless steel construction Unit includes a
spare, unused drive. |
| A098212 |
Used Andritz/Ahlstrom HB3
Moduscreen. Low pulse. Accept: 230.7 ODMTPD / 0.667% consistency / 24246 LPM.
Basket CAE 01.6T3.43/3.2%/8.3. Inlet 256.3 ODMTPD at 0.689% / 26075 LPM.
Reject: 25.6 ODMTPD / 0.982% consistancy at 1829 LPM. |
| H094207 |
Used model 4996 Beloit
Belcor, 44" dia., s/n bc-799 high density cleaner/screen contaminants
remover. Requires 150-300 hp
motor. 3/16" holes. |
| H093361 |
One (1) Used Screen
Strainer. Type: Bird
Centriscreen, model 14 A. Manufacturer: Karula mek.Verksted. Number of strainer drums: 2. Perforation: 1,6 mm dia.
Pressure fall with max: 0,35 kg/cm2. Max. Working Pressure: 5,0
kg/cm2. Rotor shaft r/min: 320. Engine: 75 HK 980 r/min.
Max. Capacity: 22000 1/min. Total weight with motor: 3500 kg. |
| H093913 |
One (1) used Bird model
14A centriscreen. Cast Iron
housing. Stainless steel wetted parts.
Holes in Basket. Belt
driven. No motor. |
| a098268 |
Used Bird model 14
Centriscreen, 316 s/s, .25 mm slotted basket. |
| A097665 |
Used Bird model 18
Centriscreen, stainless steel construction. Basket has 0.062" diameter
holes.
 |
| A098010 |
Used Bird Model 50
Centriscreen, 3 . 3 foils. 0.078 perforated basket. |
| H095180 |
Used Bird model 14A
Centriscreen. Wetted parts
are stainless steel. 1/8" (.125") holes. No motor. |
| A097386 |
Used Bird model 24 Jonsson screen, stainless steel lined, 3/16" holes, with jackshaft and 460 volt motor. |
| H093483 |
Used Bird model 24
jonsson screen with stainless steel contact parts. 0.125" holes. |
| H093197 |
Used Bird model 24
jonsson screens. One reported rebuilt and not used since. |
| A098058 |
Used Bird/Fielder model
400/HF550 stainless steel Centrisorter screen with multi-foil rotor.
 |
| A098059 |
Used Bird/Fielder model
400/HF550 stainless steel Centrisorter screen with multi-foil rotor. With 75
HP, 1800 RPM, 460 volt motor.
 |
| A097570 |
Used Bird model 400
Centrisorter screen with bump type rotor, 316 stainless steel construction. |
| A097306 |
Used Bird model 400
Entrisorter with cast iron body and stainless steel internals. Profiled
basket hole diameter is 0.032" with a bump rotor.
|
| A098264 |
Used Bird model 200
Centrisorter with .078 holes, 12% open area, 316 s/s. On base with 60 HP,
460 V 1775 RPM motor. |
| A098088 |
Used Bird stainless steel
model STB200 Centrisorters all with LFC baskets and lobe rotors designed for
clockwise rotation. Some have .050" holes and some have .010 slots. All with
50 HP, 1800 RPM motor.
 |
| A098265 |
Used Bird 400
Centrisorter with bump rotor. Screen basket WST$-339 00160. 75 psi maximum
operating presure. 1300 RPM max. 100 HP, 1780 RPM motor.
 |
| A097966 |
Used Bird model 400
Cntrisorter with cast iron body and stainless steel internals. Profiled
basket hole diameter is 0.032" with a bump rotor. No basket.
 |
| A097316 |
Used Bird #6
Centriscreen, 316 stainless steel with 4 foil rotor, .078 holes, 10 HP,
230 volt motor and belt drive. |
| H095652 |
Used Bird model 6A
Centriscreen, 316 stainless steel construction and with 0.068" holes
in the basket. No motor. |
| A097338 |
Used Bird model 8 Centriscreen, 316 stainless steel, max. capacity 7500 l/min (approx. 2000 gpm). Inner and outer baskets 0.078". Two foils. |
| A097012 |
Used Bird Escher Wyss
Model 200 Centrisorter with .008" slots, stainless steel
construction, with belt drive and 75 HP, 1775 rpm, 460v motor. Late model.
|
| A097013 |
Used Bird, Escher Wyss
Axiguard Model 3 pressure screen with .008" slots, stainless steel
construction with belt drive, clockwise rotation, and a 30 HP, 1200 rpm,
460v motor.
|
| A097386 |
Used Bird model 24 Jonsson screen, stainless steel lined, 3/16" holes, with jackshaft and 460 volt motor. |
| A097431 |
Two (2) used Black Clawson Model MS50 Mini Pressure Screens, each with 30 HP motors, 75 psi.
 |
| A097432 |
Two (2) used Black Clawson Model MS25 Mini Pressure Screens, each with 20 HP motors, 75 psi.
 |
| A097897 |
One (1) used Black
Clawson pressure screen. Model 12P. Stainless steel coarse screen .006
holes. 60 HP 3/60/460V-1175 RPM. Belt drive |
| A097155 |
Used Black Clawson model
12 p pressure screen with 2 blade rotating assembly, brear dive, stainless
steel casing. |
| A097156 |
Used Black Clawson model
12PSPH pressure screen with 2 blade (foil) rotor, .014" profile
slotted basket. All stainless steel.
|
| A097251 |
Used Black Clawson model
12 PSPH pressure screen with 4 blade (foil) rotor. All stainless steel
casing.
|
|
A098319 |
Used and Rebuilt Black
Clawson 24P Selectifier screen, stainless steel, with 4 foil rotor, new
drive assembly, bearings and seal. Rebuilt in 2009. |
|
A098320 |
Used 24P Black Clawson
Selectifier screen, stainless steel, with 4 foil rotor. |
| A098314 |
Used 24P Black Clawson
Selectifier screen, stainless steel with slotted basket and belt drive. |
| A098315 |
Used 24P Black Clawson
Selectifier screen, stainless steel with 4 blade rotor assembly .079" holed
basket Includes 200 HP, 1180 RPM, 460 volt motor. |
| A098316 |
Used 24P Black Clawson
Selectifier screen, stainless steel with 4 blade rotor assembly .079" holed
basket Includes 150 HP, 1180 RPM, 460 volt motor. |
| A098266 |
Used 24P Kadent Black
Clawson screen with .079 holes (15.9% consistency) and a4 foil rotor. 316
s/s. Belt driven 200 HP, 1185 RPM motor. |
| a098267 |
Used 24P Black Clawson
Centrisorter screen with a 4 foil rotor, 316s/s and a belt driven 200 HP,
1185 RPM motor. |
| A097142 |
Used model 24P Black
Clawson Selectifier screen with .074 holes, 4-foil rotating assembly,
v-belt drive and cast iron body. |
| H096241 |
Used Black Clawson model
24P Selectifier screen. Gear
drive. Less motor. Cast iron body epoxy coated.
Has a two foil rotor. Serial
no. 190. |
| A097141 |
Used model 30P Black
Clawson Selectifier screen with .094 holes, 4-foil rotating assembly, gear
drive and cast iron body. |
| H094151 |
Unused basket for 30P
Black Clawson pressure screen, 2.4mm (0.094") holes, 22.7% open area,
316 stainless steel. |
| A098159 |
Used Black Clawson Ultra-V 300 screen with 0.15 mm slots, operating pressure
difference of 0.2 bar. 3900 lpm @ 0.8% with 20% rejects. |
| A098158 |
Used Black Clawson Ultra-V 300 screen with 0.15 mm slots, operating pressure
difference of 0.2 bar. 3900 lpm @ 0.8% with 20% rejects. With 90Kw, 1475 rpm
motor. |
| A098160 |
Used Black Clawson Ultra-V 500 pressure screen with 0.15 mm slots,0.7 bar
operating pressuredifference. Includes acess platform for maintenance.
Upgraded in 2002 with a Fiedler rotor and basket. |
| A098184 |
Used Black Clawson Ultra V-500 primary fine pressure screen with 0.15mm slot
size, 0.7 bar operating pressure diff., 11390 lpm @ 1.2% with 20% rejects.
160 Kw, 975 rpm motor. |
| A097037 |
Used
Black Clawson Ultra Screen II with a 4 blade rotor and and available
baskets are .018" slots .094" holes .006" horizontal slots |
| A097239 |
Used inclined rotary
screen, 48" diameter x 144" manufactured by James Brinkley.
|
| H096629 |
Used C&M centrifugal
pulp screen design #a32. Stainless
steel clad with stainless steel rotor.
.065" perforation. 100
hp motor. |
| H095362 |
Used Escher Wyss model
RS1/1 rejects sorter. 2.4mm
diameter holes. Belt driven.
Requires maximum 30 kW motor, 1640 rpm.
Maximum production 15 tpd. |
| S0031-a |
Used Finckh model IIS
Hico, high consistency, open type screen, 316 ELC stainless steel
contacts, 150 mm inlet i.d.; 200 mm outlet i.d.; stainless steel rotor
with highly wear resisting steel ledges; drive; 316 s/s basket, approx.
23” dia x 35” high with 4 mm (0.157”) perforations. Requires approx
100 HP motor. Used for deflaking in a tailing screen application. New
1992.
|
| A097679 |
Used Finckh model IIHS
Cycloscreen with motor and 1.6 mm holes. New 1995. |
| H093936 |
Used Finckh model IIHS
Hico pressure screen, 316 s/s with 0.004 slots.
Horizontal pressure screen designed to produce between 160-175 ton
per day. |
| H095661 |
Used Gemco Nima model
N-900 inflow pressure screen solid 304 stainless steel body.
Basket has .010" slots. Baskets
316 stainless. 4 foil
arrangements. V-belt drive. Capacity approximately 81 bdtpd @ .75% consistency, and
approximately 90 bdted @ .9% consistency.
Maximum consistency 1%. Rotor
speed 235 rpm. Requires 75 hp
motor. |
| H094325 |
Used Gemco-Nima model 900
pressure screen with slotted basket, v-belt drive. With 0.014 slot 92 bdt capacity at .75% consistency.
235 rpm, (4) foils, (3) intermediate rings, (10) slots/inch .50 psi
housing. |
| H094611 |
Used Gemco Nima model
N-900 inflow pressure screen. Solid
T-316 stainless steel body. Basket
has .010" slots. Baskets
316 stainless. 4 foil
arrangement. V-belt drive. Capacity approximately 81 bdtpd @ 75% consistency, and
approximately 90 bted @ .9% consistency.
Maximum consistency 1%. Rotor
speed 235 rpm. Requires 75 hp
motor. |
| A098261 |
Used Hooper (now Andritz)
model PSV2200 screen with .018 slotted basket and 8 foil rotor design. 316
s/s. New 1991. |
| H092503 |
Used model KX300 Hooper
Cowan screens. Stainless
steel contacts. 0.055" diameter holes. Screening capacity of 150TPD. |
| H096592 |
Used model KX300 Hooper
Cowan screens. Stainless
steel contacts. 0.055" diameter holes. Screening capacity of 150TPD.
Serial #574. |
| A097743 |
Used Hooper model PSV
2400 secondary pressure screen with 100 HP, 1200 rpm motor.
 |
| A097124 |
Used S.W. Hooper model
PSV 200 pressure screen, 316 stainless steel with 0.083” conically
drilled holes in the basket. 200 TPD. |
| A098307 |
Used Bauer model 558-48,
48" stainless steel Hydrasieve screen with approx. .125" openings. |
| A098306 |
Used Bauer model 552-72,
72" stainless steel Hydrasieve screen with approx. 125" openings. 72" wide x
53" heigh. |
| A098305 |
Used Bauer model 554-72,
72" stainless steel Hydrasieve screen withh approx .125" openings. 72" wide
x 51" heigh. |
| A098271 |
Unused 72" Sunds
Hydrasieve with .070 slots, 316 s/s with doors.
 |
| A098157 |
Used Ahlstrom 2.5 meter
Hydrascreen (Hydrasieve) with 0.25 mm slots with a capacity of 2000 lpm. New
1995. |
| A097977 |
Used 24" Celleco Hedemora
DSM side hill screen, 120 degree bow with a 150 micron plate. All stainless
steel with a manual adjuster.
 |
| A098202 |
One (1) used 72" wide
Hooper Model HS-72-1 stainless steel sidehill dewatering screen. Serial
number H0011184. Screenplate has .020" slots.
 |
| A097568 |
Used Dorr-Oliver 72"
stainless steel DSM screen, 120 degree |
| A098064 |
Used Escher Wyss Reject
Sorter RS 2B in good working order. |
| A098175 |
Used Escher Wyss RS2B
Rejectsorter, installed in 1991, stainless steel, with 2 mm perforated
holes. Motor not included.
 |
| A097980 |
Used Escher Wyss Reject
Sorter RS 2B in good working order with spare 3mm basket. |
| A098270 |
Used Fiberprep model SPM
800 screen, 316 s/s, 0.2 mm slotted baskets, 60 psi, Durametallic mechanical
seal, belt driven 200 HP motor.
 |
| A098269 |
used Fiberprep model SPM
600 pressure screen with 020 mm slotted baket and 5 foil rotor, Durametallic
seal. 150 HP motor. |
| A097571 |
Used 120" Andritz Sprout
Bauer model 554-2-120 Hydrasieve screen, all 316 stainless steel
construction, with .020" slots and shower system. |
| H093859 |
Used model 150 HYMAC
stock drainer, 316 stainless steel. 36"
diameter drum x 115" long with 3/16" perforations on 0.315
staggered centers. Primarily used for reject draining of sulphite, kraft
and groundwood stocks. 7 1/2 hp motor and 60:1 speed reducer.
Drum speed 19.5 rpm. |
| H095799 |
Used model 2015 HYMAC
Hunter screen, s/n 4236, 316 stainless steel construction with 0.090"
holes, 0.125 clearance. Designed
for 2000 gpm. Requires 25 hp,
1750 motor. |
| H095998 |
Used HYMAC model 2821
hunter pressure screen, stainless steel construction, with 28" dia. X
21" high basket with 0.010" slots and
0.012" dia. holes. Last
used with 60 hp, 1200 rpm motor (not included). |
| H095770 |
One (1) used Hymac screen
Model 2821 T-316 S/S .012" slots without motor.
(Last used 60 HP 1200 RPM). Manufactured
1984. Excellent condition. |
| H095311 |
Used model 3232-S HYMAC
hunter pressure screen. Previously had a 0.010" slotted basket.
Has a 4-foil rotating assembly. Stainless steel contacts. Requires
60-75 hp motor. Capacity 6200 usgpm. |
| H093689 |
Used model 3636 HYMAC
Hunter screen, s/n 4234, 316 stainless steel construction with 0.094"
dia. holes conically drilled on .189" 60 degree staggered centers
giving approx. 22.7% open area. Two
foils. Recently reconditioned. Requires
75 hp, 1170 rpm motor. |
| H096209 |
Used model 3636 HYMAC
Hunter screen, s/n 4234, 316 stainless steel construction with 0.094"
dia. holes conically drilled on .189" 60 degree staggered centers
giving approx. 22.7% open area. Two
foils. Recently reconditioned. Requires
75 hp, 1170 rpm motor. |
| H093026 |
Used HYMAC model 3636-S
Hunter pressure screen with 36" dia. X 36" high basket with 0.012" slots. Last used with 100 hp, 1200 rpm motor (not included). |
| A098275 |
Used GLV/Impco Hi-Q
rejects separator model 93H720. Can handle 44 tpd at 1-1.5% constency. Upset
rate is 88 SODTPD less than 5% fiber in rejects. Rotating Screen Plate:
0,375" (10mm) perforated smooth surface 40% open area, stainless steel.
Housing is stainless steel construction. Inlet consistency in the range of
1% to 1.5% is required. 15 GPM is required for junk trap. 20 hp, 1800 rpm.
5,720 lbs. 2,594 kg .Built in 1995. |
| A098263 |
Unused Impco/GLV Hi-Q
model 208H 316 s/s fine screen with 25mm conventional mill slotts with 6
slots per inch spacing. Slotted tertiary screen. New 1997. |
| H093521 |
Used IMPCO model A-25
centrifugal screen used for washed stock or hot stock screening, sealed
black liquor knotting, fiber length classification or paper stock
cleaning. Stainless steel
construction. Type B drive arrangement (left hand). |
| H094927 |
Used IMPCO model A-25
centrifugal screen used for washed stock or hot stock screening, sealed
black liquor knotting, fiber length classification or paper stock
cleaning. Stainless steel
contacts. Type B drive
arrangement (left hand). |
| H093533 |
Used Jylhavaara type
JS150 pressure screen. 316
stainless steel with 30 kW (40 hp), 380 volt, 980 rpm Stromberg drive.
Belt drive. 2.79 sq. meter (30 sq. ft.) screen area. |
| A097575 |
Used Sunds Defribrator
Jylha Oy model JSS 210 pressure screen. 250 TPD. Consistency 1.5 %.
Operating pressure 2 bar. Holes of screen basket 1.6/1.8 mm. 90 kW motor not
included.
 |
| H092899 |
Used Jylha (Sunds) model
JS-750 pressure screen, 100,000 l/min., 7.7 sq. Meter of screen area.
0-0.6 bar pressure drop.
0-1.5% consistency.
With 132 kw/1000 rpm motor. |
| H093052 |
Used model JSS90 Jylha
pressure screen, 110 tpd, 10 cu.m/min., 0.90 sq. m. Screening area, with
30 kW, 100 rpm motor. Acid
proof construction. |
| H095337 |
Used model JBS110
Jylhavaara pressure, knotter, acid proof
construction, 22 kw/1500 rpm.
450 tpd. |
| H093918 |
Used KAMYR UNI 100
pressure screen, 300 adtpd, 1.7-2.0% feed consistency. Used on unbleached
pine sulphite pulp. 1.2 mm diameter holes in s/s basket. With `132 kW
motor and belt drive. |
| H093581 |
Used KMW model UNI 65
screen. Stainless steel
construction. |
| H094198 |
Used model SPRF 2000
Krofta spray filter, designed to handle 2000 liters per minute (528gpm) of
white water. 41" dia. X
95" high, stainless steel contacts. |
| H094492 |
Used model 300 Lamort
Separafiner. Deflakes and
coarse screens secondary fiber at a consistency of 4 - 6%, rated 50 tpd.
Includes a 100 hp 1780 rpm 460 volt direct coupled motor. |
| A098290 |
Used Lamort CH3 screen
with .020 mm slots. 30-100 TPD production capacity. Includes 55 Kw 380V
motor. |
| A097025 |
Unused Lamort SP 600
pressure screen. Steel body with stainless steel screen and rotor. Never
installed. |
| A097297 |
Used Lamort model SP 600
pressure screen, stainless steel internal contacts, 50-60 TPD, 10,000 LPM
(2640 GPM), with 15-17 HP motor. 2 baskets with 1.5mm - 2.2 mm slots. |
| A097296 |
Used Lamort model SP 600
pressure screen, stainless steel internal contacts, 50-60 TPD, 10,000 LPM
(2640 GPM), with 20 HP, 950 RPM motor, 389V, 50 Hz and V-belt drive.
Basket has 3 mm holes and a 4 blade rotor. |
| A097167 |
Used Lamort model SPN 600
pressure screen, stainless steel constriction with motor.
|
| A097827 |
Used Lamort model SP 800
screen (built by Licar under license), 316-L stainless steel, with 1.6 mm
basket holes. Less motor.
 |
| A097650 |
Used Lamort (Licar) model
SPN 800 vertical screen, built 1992, stainless steel. 1.8 mm basket holes.
40 HP, 750 RPM 50 Hz motor.
 |
| A098291 |
Used Lamort model SP 800
low density pressure screen, stainless steel, with 2.5 mm holes and 50 Kw
380V motor. Includes spare basket with .015 mm slots. |
| A098289 |
Used Lamort SPN 120 low
consistency pressure screen. Working consistency 0-1.5; max flow rate 50,000
lpm; 360 TPD maximum production capasity. Stainless steel. 55 kW, 380V
motor. With spare slotted basket .020 mm slots. |
| A098262 |
Used Metso Temmago Model
LS 3200 Optiscreen, 316 s/s. Design Flow: 150 UM (100 mesh) 40 L/S (635 GPM)
Spare Screens: 150 UM/69 LS, 102x46x60 CM, 0.27 CBM, Optiscreens are used
for screening of coating colors, pigment slurries, binders and additives. |
| H092605 |
Used 4' dia. X 12' long
Sprout Waldron rotary drainer, serial #681578, with 304 stainless steel
contacts. 8 mesh, 0.093"
screen. Installed in 1968. Type rsd. |
| A097294 |
Used Sunds model M 400
Centrisorter, 2343 stainless steel, with 0.018" slotted basket.
Includes 75 kW, 1500 rpm motor and V-belt drive. Rated 150-200 TPD. |
| A096836 |
Used Model WWC30 Sweco
white water filter, 54" diameter x 56" high. Steel epoxy lined
shell with stainless steel internals. Baldor 3 HP motor, 1140 rpm, 208-220
volts. Nominal capacity approx. 800 gpm with 120 mesh at 100 ppm.
|
| A098063 |
Used Voith model 1000K
vibrating screen woth 6 mm holes. |
|
A098067 |
Used Voit model 5 stainless steel pressure screen with .010 slots and multi
foil rotor. With motor and base. New 1993.
 |
|
Used Voith # 20 stainless steel pressure screen with .008 slots and multi
foil rotor. With motor. New 1995
 |
| A098215 |
Used Voith model GR 21
pressure screen with 75 kW, 1475 rpm motor. 1,6 mm diameter holes. |
| A098014 |
Used Voith model GR 21
pressure screen with multi-rotor. Screen basket holes are 2.4mm diameter. |
