| A097019 |
Used Beloit Jones model
4997 55” Belcor unit, iron wear resistand construction with low profile
rotor. Impeller and extraction grate are type 410 stainless steel. 80”
outside diameter tank with a 10” diameter inlet connection. A T-1 liner
installed to protect the chamber against wear near the impeller. 250 HP,
1200 RPM motor and V-belt drive. Junk trap. |
| A098213 |
Used Fiberprep
Diablofiner turboseparator/fiberizer, model 2 Diablo (Series 11). 45 psi
maximum. |
| A098092 |
Used Escher Wyss RS 2B
Reject Sorter, 3mm perforations (+ unused spare basker). 70 TPD throughput
at 2% consistency. Requires 55/75 KW motor. |
| H094375 |
Used model SP475 Hett
separator with 5mm holes to produce 1200 kg/hour at 4%.
Requires an approximately 15 kW motor. |
| H093257 |
One (1) used Rejectsorter
Escher Wyss, Model RS3,Motor: 75Kw/1500rpm Inlet Consistency: 2-4%, Reject
Consistency: 10-15%, Capacity: 40-45 TPD, Perforation: 2,4mm. |
|
A098280 |
Voity model 10/11
Turboseparator with orriginal body and door and new basalt lining. Screen
plate perforation to meet customer's requirement. Rebuilt 5 arm rotor. 90 -
110 TPD at 4% consistency.
 |
| A097931 |
Rebuilt Voth ATS 20/21
Turbo Separator with new basalt lining. Screen plate to customer's specs.
The accepts box in a Voith original. New bearings. Drive pulley and new
stainles steel dirt trap are included, but not dirt trap pneumatic valves or
light reject valve. Operating consistency 3 to 6%. Throughput a 4% with a
size 20 = 135 TPD, size 21 = 190 TPD. Requires 132 kW motor in a # 20 and
160 kW for a 21. Delivery 8 to 10 weeks. |
| A098018 |
Used and rebuilt ATS 21
Turbo Separator with 3 mm perforated plate. 190 TPD using 50/50% mixed
wastepaper. |